SXDT-Embedded
/
BLE_DCF_TYQ_CH592F
mirror of https://gitee.com/SXDT-Embedded/BLE_DCF_TYQ_CH592F.git
6
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

暂存，改per.c

This commit is contained in:
stark1898y 2024-12-15 16:52:59 +08:00
parent ba4f6509cb
commit 76de810741
2 changed files with 38 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
APP/peripheral.c
View File

@ -43,16 +43,16 @@
*/
// How often to perform periodic event
#define SBP_PERIODIC_EVT_PERIOD 1600
#define SBP_PERIODIC_EVT_PERIOD (160 * 10) // (160 = 100ms)
// How often to perform read rssi event
#define SBP_READ_RSSI_EVT_PERIOD 3200
#define SBP_READ_RSSI_EVT_PERIOD (1600 * 3) // (160 = 100ms)
// Parameter update delay
#define SBP_PARAM_UPDATE_DELAY 6400
#define SBP_PARAM_UPDATE_DELAY (1600 * 4)
// PHY update delay
#define SBP_PHY_UPDATE_DELAY 2400
#define SBP_PHY_UPDATE_DELAY (1600 * 2)
// What is the advertising interval when device is discoverable (units of 625us, 80=50ms)
#define DEFAULT_ADVERTISING_INTERVAL (160 * 1)
@ -62,7 +62,7 @@
#define DEFAULT_DISCOVERABLE_MODE GAP_ADTYPE_FLAGS_GENERAL
// Minimum connection interval (units of 1.25ms, 6=7.5ms)
#define DEFAULT_DESIRED_MIN_CONN_INTERVAL (80 * 5)
#define DEFAULT_DESIRED_MIN_CONN_INTERVAL (80 * 5) // (80 = 100ms)
// Maximum connection interval (units of 1.25ms, 100=125ms)
#define DEFAULT_DESIRED_MAX_CONN_INTERVAL (80 * 10)

41
APP/peripheral_main.c
View File

@ -10,28 +10,32 @@
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
*******************************************************************************/
/******************************************************************************/
/* 头文件包含 */
#include "CONFIG.h"
#include "HAL.h"
#include "gattprofile.h"
#include "peripheral.h"
#include "bsp_flash.h"
#include "bsp_adc.h"
#include "bsp_key.h"
#include "bsp_beep_led_emv.h"
#include "bsp_i2c.h"
#include "log.h"
#include "bsp_uart.h"
#include "bsp_i2c.h"
#include "bsp_iwdg.h"
#include "bsp_flash.h"
#undef LOG_ENABLE
#define LOG_ENABLE 1
#undef LOG_TAG
#define LOG_TAG "main"
__attribute__((aligned(4))) uint32_t MEM_BUF[BLE_MEMHEAP_SIZE / 4];
@ -71,8 +75,10 @@ __attribute__((noinline)) void Main_Circulation()
while (1)
{
TMOS_SystemProcess();
KEY_ProcessLoop();
BSP_UART1_TxLoop();
if (GPIOB_ReadPortPin(GPIO_Pin_15) == 0)
#if 0
if (GPIOB_ReadPortPin(GPIO_Pin_7) == 0)
{
// 12V_EN
BOOST_EN;
@ -113,7 +119,6 @@ __attribute__((noinline)) void Main_Circulation()
DelayMs(1000);
logDebug("LED_ALL_OFF_DEINIT\n");
logDebug("Delay 6s\n");
// EMV_CHARGE
@ -136,9 +141,24 @@ __attribute__((noinline)) void Main_Circulation()
EMV_CHARGE_OFF_DEINIT;
EMV_OFF_DEINIT;
}
#endif
}
}
// https://www.cnblogs.com/gscw/p/18530905
// 在连接间隔和广播间隔到来时，会进入该回调，可以在回调函数加上其他执行逻辑代码，如喂狗等。
void BLE_AdvertiseEventCB(uint32_t timeUs)
{
// FEED_IWDG();
logDebug("BLE_AdvertiseEventCB");
}
void BLE_ConnectEventCB(uint32_t timeUs)
{
// FEED_IWDG();
logDebug("BLE_ConnectEventCB");
}
/*********************************************************************
* @fn main
*
@ -166,7 +186,6 @@ int main(void)
// 改成1500000波特率了
BSP_UART1_Init(1500000);
// logDebug("Start @ChipID=%02X\n", R8_CHIP_ID);
logDebug("Start @ChipID=%02X\n", R8_CHIP_ID);
logError("中文测试 %2.2f", 123.456);
@ -186,12 +205,16 @@ int main(void)
logDebug("%s\n", VER_LIB);
uint8_t MacAddr[6];
GetMACAddress(MacAddr);
// 手机APP显示是倒序的[5-0],不是[0-5]
logDebug("MacAddr: %02X:%02X:%02X:%02X:%02X:%02X", MacAddr[0], MacAddr[1], MacAddr[2], MacAddr[3], MacAddr[4], MacAddr[5]);
HAL_Init();
GAPRole_PeripheralInit();
Peripheral_Init();
// 在连接间隔和广播间隔到来时，会进入回调中喂狗
// LL_AdvertiseEventRegister(BLE_AdvertiseEventCB);
// LL_ConnectEventRegister(BLE_ConnectEventCB);
BSP_FLASH_Init();
@ -200,6 +223,8 @@ int main(void)
BSP_KEY_Init(app_task_handler);
// IWDG_Init(1500);
Main_Circulation();
}