/*
 * @Author       : stark1898y 1658608470@qq.com
 * @Date         : 2024-09-04 17:33:57
 * @LastEditors: mbw && 1600520629@qq.com
 * @LastEditTime: 2024-11-30 16:32:01
 * @FilePath: \ble_bjq_ch303rct6_ml307\bsp\src\bsp_hr.c
 * @Description  :
 *
 * Copyright (c) 2024 by yzy, All Rights Reserved.
 */
#include "bsp_hr.h"
#include "lwrb.h"
#include "bsp_flash.h"
#include "bsp_rtc.h"
#include "at_device_ml307.h"
#include "user_sys.h"
#include <string.h>


#define LOG_TAG "bsp_hr"
#define LOG_LVL LOG_LVL_DBG
#include <ulog.h>

ALIGN(RT_ALIGN_SIZE)
static char hr_thread_stack[HR_THREAD_STACK_SIZE];
static struct rt_thread hr_thread;

#define HR_RX_RB_LENGTH (64U)
#define HR_TX_RB_LENGTH (256U)

static lwrb_t hr_rx_rb;
static rt_uint8_t hr_rx_rb_data[HR_RX_RB_LENGTH];

static lwrb_t hr_tx_rb;
static rt_uint8_t hr_tx_rb_data[HR_TX_RB_LENGTH];

static rt_sem_t hr_rx_ok_sem;
static rt_sem_t hr_rx_parity_err_sem;

static rt_timer_t hr_timer;
uint8_t hr_rx_count = 0; // 接收缓冲区中，已经收到的数据包数量
void hr_timeout(void *parameter)
{
    rt_sem_release(hr_rx_ok_sem);
    rt_timer_stop(hr_timer);
}

void USARTx_SendByte(USART_TypeDef *pUSARTx, uint8_t data)
{
    USART_SendData(pUSARTx, data);
    while (USART_GetFlagStatus(pUSARTx, USART_FLAG_TXE) == RESET);
}

void USARTx_SendStr(USART_TypeDef *pUSARTx, char *str)
{
    uint8_t i = 0;
    do
    {
        USARTx_SendByte(pUSARTx, *(str + i));
        i++;
    } while (*(str + i) != '\0');
    while (USART_GetFlagStatus(pUSARTx, USART_FLAG_TC) == RESET);
}

// 串口发送数据
unsigned int BSP_Hr_Send_Data(const void *buf, unsigned int len)
{
    unsigned int ret;

    ret = lwrb_write(&hr_tx_rb, buf, len);
    USART_ITConfig(HR_UART, USART_IT_TXE, ENABLE);

    return ret;
}


/**
 * @description: 从接收缓冲区中获取一帧有效数据
 * @param {TsFrameData} *pFrameData 主机帧
 * @param {uint8_t} *p_src      接收缓冲区
 * @param {uint16_t} src_len    接收缓冲区长度
 * @return {*}
 */
TsFrameData *HR_GetFrameData(const rt_uint8_t *p_src, const rt_uint8_t src_len)
{
    rt_uint8_t data_field_len = 0;
    rt_uint8_t check_sum      = 0;

    TsFrameData *get_buffer = RT_NULL;

    for (rt_size_t i = 0; i < src_len; i++)
    {
        if (p_src[i] == FRAME_HEADER)
        {
            data_field_len = p_src[i + 3];

            if (p_src[i + 3 + data_field_len + 2] == FRAME_TAIL)
            {
                check_sum = XOR_CheckSum(&p_src[i], (4 + data_field_len));

                if (p_src[i + 3 + data_field_len + 1] == check_sum)
                {
                    get_buffer = (TsFrameData *)rt_malloc(sizeof(TsFrameData) + sizeof(rt_uint8_t) * data_field_len);
                    if (get_buffer == RT_NULL)
                    {
                        LOG_E("get space fail\r\n");

                        return RT_NULL;
                    }
                    get_buffer->c1  = p_src[i + 1];
                    get_buffer->c2  = p_src[i + 2];
                    get_buffer->len = data_field_len;

                    if (data_field_len > 0)
                    {
                        rt_memmove(get_buffer->data, &p_src[i + 4], data_field_len);
                    }
                    LOG_D("HR_GetDataFrame Success!");

                    return get_buffer;
                }
            }
        }
    }
    LOG_E("HR_GetDataFrame Fail!");

    return get_buffer;
}

rt_uint8_t HR_GenerateRawFrame(TsRawFrameData *pRawData, rt_uint8_t c1, TeFrameC2 c2, const rt_uint8_t *p_src, rt_uint8_t src_len)
{
    pRawData->len = src_len + 6;

    rt_memset(pRawData->buf, 0, sizeof(pRawData->buf));

    pRawData->buf[0] = FRAME_HEADER;
    pRawData->buf[1] = c1;
    pRawData->buf[2] = c2;
    pRawData->buf[3] = src_len;

    rt_memmove(&pRawData->buf[4], p_src, src_len);

    // 从帧起始符开始到校验码之前所有字节的和的模256
    // ，即各字节不计超过255的溢出值的二进制算术和。
    pRawData->buf[pRawData->len - 2] = XOR_CheckSum(&pRawData->buf[0], pRawData->len - 2);
    pRawData->buf[pRawData->len - 1] = FRAME_TAIL;

    //     LOG_HEX("HrRawData", 16, &pRawData->buf[0], pRawData->len);

    return RT_EOK;
}

rt_uint8_t HR_ProcessData(const TsFrameData *pHostFrameData)
{
    TuFlashProductTimeLimitFrame ReadLimitTime = {0};
    TsRawFrameData RawData;
    rt_uint8_t data_field[64] = {0};
    rt_uint8_t c1, c2, data_len = 0;

    c1 = pHostFrameData->c1;
    c2 = pHostFrameData->c2;

    switch (c2)
    {
        case kNumOfRecords: // 查询各类记录的总数 AA 00 00 00 AA 55
        {
            LOG_D("kNumOfRecords");
            c1       = 0;
            data_len = sizeof(TsTotalRecords);
            if (Flash_GetTotalRecord((TsTotalRecords *)&data_field[0]) != RESET)
            {
                goto send;
            }
            break;
        }
        case kAlarmRecord: // 查询第n条探测器报警记录AA 01 01 00 AC 55
        {
            LOG_D("kAlarmRecord(%d)", c1);
            data_len      = 7;
            data_field[0] = c1;
            if (Flash_GetRecord(kAlarmRecord, c1, (TsRecordsTime *)(&data_field[1])) != RESET)
            {
                if (data_field[0] == 0)
                {
                    rt_memset(data_field, 0, data_len);
                }
                goto send;
            }
            break;
        }
        case kAlarmRcyRecord: // 查询第n条探测器报警恢复记录  AA 01 02 00 AD 55
        {
            LOG_D("kAlarmRcyRecord(%d)", c1);
            data_len      = 7;
            data_field[0] = c1;
            if (Flash_GetRecord(kAlarmRcyRecord, c1, (TsRecordsTime *)(&data_field[1])) != RESET)
            {
                goto send;
            }
            break;
        }
        case kFaultRecord: // 查询第n条探测器故障记录  AA 01 03 00 AE 55
        {
            LOG_D("kFaultRecord(%d)", c1);
            data_len      = 7;
            data_field[0] = c1;
            if (Flash_GetRecord(kFaultRecord, c1, (TsRecordsTime *)(&data_field[1])) != RESET)
            {
                goto send;
            }
            break;
        }
        case kFaultRcyRecord: // 查询第n条探测器故障恢复记录  AA 01 04 00 AF 55   AA 66 04 00 14 55
        {
            LOG_D("kFaultRcyRecord(%d)", c1);
            data_len      = 7;
            data_field[0] = c1;
            if (Flash_GetRecord(kFaultRcyRecord, c1, (TsRecordsTime *)(&data_field[1])) != RESET)
            {
                goto send;
            }
            break;
        }
        case kPowerFailureRecord: // 查询第n条探测器掉电记录 AA 01 05 00 B0 55
        {
            LOG_D("kPowerFailureRecord(%d)", c1);
            data_len      = 7;
            data_field[0] = c1;
            if (Flash_GetRecord(kPowerFailureRecord, c1, (TsRecordsTime *)(&data_field[1])) != RESET)
            {
                goto send;
            }

            break;
        }
        case kPowerOnRecord: // 查询第n条探测器上电记录  AA 01 06 00 B1 55
        {
            LOG_D("kPowerOnRecord(%d)", c1);
            data_len      = 7;
            data_field[0] = c1;
            if (Flash_GetRecord(kPowerOnRecord, c1, (TsRecordsTime *)(&data_field[1])) == READY)
            {
                goto send;
            }
            break;
        }
        case kSensorFailureRecord: // 查询气体传感器失效记录  AA 00 07 00 B1 55
        {
            LOG_D("kSensorFailureRecord(%d)", c1);

            data_len = 7;
            if (Flash_GetRecord(kSensorFailureRecord, 1, (TsRecordsTime *)&data_field[1]) != RESET)
            {

                if (c1 != 0) // 接收到的数据不对，直接返回0
                {
                    rt_memset(data_field, 0, data_len);
                }
                else
                {
                    if (data_field[1] == 0) // 未失效
                    {
                        rt_memset(data_field, 0, data_len);
                    }
                    else // 失效
                    {
                        data_field[0] = 1;
                    }
                }
                goto send;
            }
            break;
        }
        case kGetCurrentTime: // AA 00 08 00 B2 55
        {
            LOG_D("kGetCurrentTime");

            data_len = sizeof(TsRecordsTime);
            RTC_GetTime();

            data_field[0] = (uint8_t)((RtcDateTime.year >> 8) & (0XFF));
            data_field[1] = (uint8_t)((RtcDateTime.year) & (0xFF));
            data_field[2] = RtcDateTime.month;
            data_field[3] = RtcDateTime.day;
            data_field[4] = RtcDateTime.hour;
            data_field[5] = RtcDateTime.minute;

            goto send;

            break;
        }
        /*扩展命令*/
        case kGetCurrentTimeSecond: // AA 00 09 00 B3 55
        {
            LOG_D("kGetCurrentTimeSecond");

            data_len = 7;
            RTC_GetTime();

            data_field[0] = (uint8_t)((RtcDateTime.year >> 8) & (0XFF));
            data_field[1] = (uint8_t)((RtcDateTime.year) & (0xFF));
            data_field[2] = RtcDateTime.month;
            data_field[3] = RtcDateTime.day;
            data_field[4] = RtcDateTime.hour;
            data_field[5] = RtcDateTime.minute;
            data_field[6] = RtcDateTime.second;

            goto send;

            break;
        }
        case kSetCurrentTime: /*2024-03-25 17:34:56   AA 00 0A 07 07 E8 03 19 11 22 38 31 55*/
        {
            LOG_D("kSetCurrentTime");

            data_len = 7;

            RtcDateTime.hour   = pHostFrameData->data[4];
            RtcDateTime.minute = pHostFrameData->data[5];
            RtcDateTime.second = pHostFrameData->data[6];
            RtcDateTime.day    = pHostFrameData->data[3];
            RtcDateTime.month  = pHostFrameData->data[2];
            RtcDateTime.year   = (rt_uint16_t)(pHostFrameData->data[0] << 8 | pHostFrameData->data[1]);

            RTC_SetTime(RtcDateTime.year, RtcDateTime.month, RtcDateTime.day,
                        RtcDateTime.hour, RtcDateTime.minute, RtcDateTime.second);

            RTC_GetTime();
            data_field[0] = (uint8_t)((RtcDateTime.year >> 8) & (0XFF));
            data_field[1] = (uint8_t)((RtcDateTime.year) & (0xFF));
            data_field[2] = RtcDateTime.month;
            data_field[3] = RtcDateTime.day;
            data_field[4] = RtcDateTime.hour;
            data_field[5] = RtcDateTime.minute;
            data_field[6] = RtcDateTime.second;

            goto send;

            break;
        }
        case kSetFactoryTime: /*2024-03-26 9:30:00  AA 00 0B 07 07 E8 03 1A 09 1E 00 EF 55*/
        {
            LOG_D("kSetFactoryTime\r\n");
            data_len = 7;
            Flash_SetProductTimeLimit((rt_uint16_t)(pHostFrameData->data[0] << 8 | pHostFrameData->data[1]), pHostFrameData->data[2],
                                      pHostFrameData->data[3], pHostFrameData->data[4], pHostFrameData->data[5], pHostFrameData->data[6], kFactoryTimeId);
            Flash_GetProductTimeLimit(&ReadLimitTime, kFactoryTimeId);

            data_field[0] = (uint8_t)(ReadLimitTime.Struct.year >> 8);
            data_field[1] = (uint8_t)(ReadLimitTime.Struct.year);
            data_field[2] = ReadLimitTime.Struct.month;
            data_field[3] = ReadLimitTime.Struct.day;
            data_field[4] = ReadLimitTime.Struct.hour;
            data_field[5] = ReadLimitTime.Struct.minute;
            data_field[6] = ReadLimitTime.Struct.second;

            goto send;

            break;
        }
        case kSetExpirationTime: /*2028-3-26 9:30:00  AA 00 0C 07 07 EC 03 1A 09 1E 00 F4 55*/
        {
            LOG_D("kSetExpirationTime");

            data_len = 7;

            Flash_SetProductTimeLimit((uint16_t)(pHostFrameData->data[0] << 8 | pHostFrameData->data[1]), pHostFrameData->data[2], pHostFrameData->data[3], pHostFrameData->data[4], pHostFrameData->data[5], pHostFrameData->data[6], kExpirationTimeId);
            Flash_GetProductTimeLimit(&ReadLimitTime, kExpirationTimeId);

            data_field[0] = (uint8_t)(ReadLimitTime.Struct.year >> 8);
            data_field[1] = (uint8_t)(ReadLimitTime.Struct.year);
            data_field[2] = ReadLimitTime.Struct.month;
            data_field[3] = ReadLimitTime.Struct.day;
            data_field[4] = ReadLimitTime.Struct.hour;
            data_field[5] = ReadLimitTime.Struct.minute;
            data_field[6] = ReadLimitTime.Struct.second;

            goto send;

            break;
        }
        default:
            break;
    }

send:
{
    if ((c1 == 0) && ((0 < c2) & (c2 < kSensorFailureRecord)))
    {
        rt_memset(data_field, 0, data_len);
    }
    HR_GenerateRawFrame(&RawData, c1, (TeFrameC2)c2, data_field, data_len);

    BSP_Hr_Send_Data(&RawData.buf[0], RawData.len);
    return 0;
}

    return RT_EOK;
}

// int usr_sprintf(char *buf, const char *format, ...)
// {
//     int n;
//     va_list arg_ptr;
//     if (rt_thread_self() != RT_NULL)
//         rt_enter_critical();
//     va_start(arg_ptr, format);
//     n = vsprintf(buf, format, arg_ptr);
//     va_end(arg_ptr);
//     if (rt_thread_self() != RT_NULL)
//         rt_exit_critical();
//     return n;
// }

// 查找 [] 并判断字符串
int Process_Factor_Cmd(const char *rx_buff, size_t length)
{
    TuFlashProductTimeLimitFrame ReadLimitTime;

    char buf[512]  = {0};
    char imei[16]  = {0};
    char imsi[16]  = {0};
    char iccid[21] = {0};
    // 工厂命令
    const char factory_cmd1[] = "[getParameter]"; // 工厂命令1
//    const char factory_cmd2[] = "[getCH4]";       // 工厂命令2

    // 查找 []
    const char *start_bracket = memchr(rx_buff, '[', length);
    const char *end_bracket   = memchr(start_bracket, ']', length - (start_bracket - rx_buff));

    if (start_bracket && end_bracket)
    {
        // 计算 [] 之间的字符串长度
        size_t cmd_length = end_bracket - start_bracket + 1;
        char cmd[cmd_length + 1];
        rt_strncpy(cmd, start_bracket, cmd_length);
        cmd[cmd_length] = '\0';
        if (rt_strcmp(cmd, factory_cmd1) == 0) // 比较接收到的字符串与 factory_cmd1
        {
            rt_uint8_t time_buf[8] = {0};

            if ((*(rt_uint8_t *)FLASH_FACTOR_TIME_NUM_ADDR != 0xE3)&&(*(rt_uint8_t *)FLASH_FACTOR_TIME_NUM_ADDR != 0x39))
            {
                for (rt_uint8_t i = 0; i < 6; i++)
                {
                    time_buf[i] = *(rt_uint8_t *)( FLASH_FACTOR_TIME_NUM_ADDR + i);
                    LOG_D("%02x", time_buf[i]);
                }
                rt_uint32_t cnt = (rt_uint32_t)((time_buf[2]<<16)| (time_buf[1] << 8)|time_buf[0]);
                LOG_D("time_buf[2] = %02x time_buf[1] = %02x time_buf[0] = %02x cnt = %04d", time_buf[2], time_buf[1], time_buf[0], cnt);
                Get_Iot_Imei(imei, FLASH_IOT_IMEI_LEN);
                Get_Iot_Imsi(imsi, FLASH_IOT_IMSI_LEN);
                Get_Iot_Iccid(iccid, FLASH_IOT_ICCID_LEN);
                rt_sprintf(buf,
                            "\r\n[ID  :YD4N02/%02d%02d%02d%04d]\r\n"
                            "[IMEI:%s]\r\n"
                            "[IMSI:%s]\r\n"
                            "[CCID:%s]\r\nOK\r\n",
                            time_buf[5], time_buf[4], time_buf[3], cnt, imei, imsi, iccid);

                BSP_Hr_Send_Data(buf, rt_strlen(buf));
               
                
                Flash_GetProductTimeLimit(&ReadLimitTime, kFactoryTimeId);
                if ((ReadLimitTime.Struct.year != 2000 + time_buf[5])&&
                    (ReadLimitTime.Struct.month != time_buf[4])&&
                    (ReadLimitTime.Struct.day != time_buf[3]))//只写入一次
                {
                     RTC_GetTime();
                    Flash_SetProductTimeLimit(2000 + time_buf[5], time_buf[4], time_buf[3], RtcDateTime.hour, RtcDateTime.minute, RtcDateTime.second, kFactoryTimeId);
                    Flash_SetProductTimeLimit(2000 + time_buf[5] + 8, time_buf[4], time_buf[3], RtcDateTime.hour, RtcDateTime.minute, RtcDateTime.second, kExpirationTimeId);
                   
                }  
            }
            else
            {
                LOG_E("[%s] is not set\r\n", "factory time");
                BSP_Hr_Send_Data("factory time is not set\r\n", rt_strlen("factory time is not set\r\n"));
            }                
            return RT_EOK;
        }
//        else if (rt_strcmp(cmd, factory_cmd2) == 0) // 比较接收到的字符串与 factory_cmd2
//        {
//            rt_sprintf(buf,
//                       "\r\n[STATUS        :0x%X]\r\n"
//                       "[VALUE         :%.2f]\r\n"
//                       "[LIGHT         :%.2f]\r\n"
//                       "[PD            :%.2f]\r\n"
//                       "[TEMPERTURE    :%.2f]\r\n"
//                       "[TEC-TEMPERTURE:%.2f]\r\n"
//                       "[WORKTIME      :%d]\r\nOK\r\n",
//                       H308.Data.fault_code, H308.Data.lel, H308.Data.signal_strength, H308.Data.gain, H308.Data.temp, (H308.Data.laser_temp / 10), work_duration);
//            LOG_D("buf:%s", buf);
//            BSP_Hr_Send_Data(buf, rt_strlen(buf));
//
//            return RT_EOK;
//        }
    }
    return RT_ERROR;
}

static void hr_thread_entry(void *param)
{
    LOG_D("hr_thread_entry");
    uint8_t rx_buff[32] = {0};
//    LOG_D("factor_time addr = %x", FLASH_FACTOR_TIME_NUM_ADDR);
    while (1)
    {
        rt_sem_take(hr_rx_ok_sem, RT_WAITING_FOREVER);
        if (rt_sem_trytake(hr_rx_parity_err_sem) == 0)
        {
            LOG_D("hr_rx_parity_err_sem");
            lwrb_free(&hr_rx_rb);
            continue;
        }
        uint8_t len = lwrb_get_full(&hr_rx_rb);
        lwrb_read(&hr_rx_rb, rx_buff, len);
        LOG_HEX("hr_rx_data:", 16, &rx_buff[0], len);
        if (SysControl.status <= kPreheatingEvent)//等待预热完成和激光器自检
        {
            char buf[128] = "[CH4-Module power-on self-check,please wait]";

            BSP_Hr_Send_Data(buf, rt_strlen(buf));
        }
        else
        {
            if (Process_Factor_Cmd(rx_buff, len) == RT_EOK)
            {
                LOG_D("工厂命令处理"); // 工厂命令处理
            }
            else
            {
                if (len >= HOST_FRAME_MIN_LEN)
                {
                    TsFrameData *HostFrameData = HR_GetFrameData(rx_buff, len);
                    if (HostFrameData != RT_NULL)
                    {
                        LOG_HEX("HostFrameData", 16, &HostFrameData->data[0], HostFrameData->len); // 数据段
                        HR_ProcessData(HostFrameData);
                    }
                    rt_free(HostFrameData);
                    HostFrameData = RT_NULL;
                }
            }
        }

        rt_memset(rx_buff, 0, len);
        rt_thread_mdelay(10);
    }
}

void Hr_Init(void)
{
    GPIO_InitTypeDef GPIO_InitStructure   = {0};
    USART_InitTypeDef USART_InitStructure = {0};
    NVIC_InitTypeDef NVIC_InitStructure   = {0};

    lwrb_init(&hr_rx_rb, hr_rx_rb_data, sizeof(hr_rx_rb_data));
    lwrb_init(&hr_tx_rb, hr_tx_rb_data, sizeof(hr_tx_rb_data));

    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);

    GPIO_InitStructure.GPIO_Pin = HR_TX_GPIO_PIN;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
    GPIO_Init(HR_TX_GPIO_PORT, &GPIO_InitStructure);

    GPIO_InitStructure.GPIO_Pin = HR_RX_GPIO_PIN;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
    GPIO_Init(HR_RX_GPIO_PORT, &GPIO_InitStructure);

    USART_DeInit(HR_UART); // 寄存器恢复默认值
    USART_InitStructure.USART_BaudRate   = HR_BAUDRATE;
    USART_InitStructure.USART_WordLength = USART_WordLength_9b;
    USART_InitStructure.USART_StopBits   = USART_StopBits_1;
    USART_InitStructure.USART_Parity     = USART_Parity_Even;

    USART_InitStructure.USART_Mode                = USART_Mode_Tx | USART_Mode_Rx;
    USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
    USART_Init(HR_UART, &USART_InitStructure);

    USART_ITConfig(HR_UART, USART_IT_RXNE, ENABLE);
    USART_ITConfig(HR_UART, USART_IT_PE, ENABLE);
    USART_ITConfig(HR_UART, USART_IT_TXE, DISABLE);

    NVIC_InitStructure.NVIC_IRQChannel                   = USART2_IRQn;
    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
    NVIC_InitStructure.NVIC_IRQChannelSubPriority        = 1;
    NVIC_InitStructure.NVIC_IRQChannelCmd                = ENABLE;
    NVIC_Init(&NVIC_InitStructure);

    USART_Cmd(HR_UART, ENABLE);
    LOG_I("hr Init");
}

int BSP_HR_Init(void)
{
    Hr_Init();

    hr_rx_ok_sem = rt_sem_create("hr_rx_ok_sem", 0, RT_IPC_FLAG_FIFO);
    if (hr_rx_ok_sem == RT_NULL)
    {
        LOG_E("hr_rx_ok_sem create failed");
    }
    hr_rx_parity_err_sem = rt_sem_create("hr_rx_pe", 0, RT_IPC_FLAG_FIFO);
    if (hr_rx_parity_err_sem == RT_NULL)
    {
        LOG_E("hr_rx_parity_err_sem create failed");
    }

    hr_timer = rt_timer_create("hr_timeout", hr_timeout, RT_NULL, 100, RT_TIMER_FLAG_PERIODIC);
    if (hr_timer == RT_NULL)
    {
        LOG_E("hr_timer create failed");
    }

    rt_err_t ret = rt_thread_init(&hr_thread,
                                  "hr_thread",
                                  hr_thread_entry,
                                  RT_NULL,
                                  &hr_thread_stack[0],
                                  sizeof(hr_thread_stack),
                                  HR_THREAD_PRIORITY, HR_THREAD_TIMESLICE);

    if (ret == RT_EOK)
    {
        rt_thread_startup(&hr_thread);
    }
    else
    {
        LOG_E("rt_thread_init hr_thread Failed");
        return ret;
    }

    return ret;
}
// INIT_PREV_EXPORT(BSP_HR_Init);

void USART2_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
void USART2_IRQHandler(void)
{
    GET_INT_SP();
    rt_interrupt_enter();
    unsigned char data;
    if (USART_GetITStatus(HR_UART, USART_IT_PE) != RESET)
    {
        rt_sem_release(hr_rx_parity_err_sem);
    }
    if (USART_GetITStatus(HR_UART, USART_IT_RXNE) != RESET)
    {
        data = USART_ReceiveData(HR_UART);
        lwrb_write(&hr_rx_rb, &data, 1);
        rt_timer_start(hr_timer);
    }
    if (USART_GetITStatus(HR_UART, USART_IT_TXE) != RESET)
    {
        if (lwrb_read(&hr_tx_rb, &data, 1))
            USART_SendData(HR_UART, data);
        else
        {
            USART_ITConfig(HR_UART, USART_IT_TXE, DISABLE);
        }
    }
    rt_interrupt_leave();
    FREE_INT_SP();
}