BLE_TYQ_BJQ_CH584M/bsp/inc/bsp_valve.h

/*** 
 * @Author: mbw
 * @Date: 2024-12-09 11:40:04
 * @LastEditors: mbw && 1600520629@qq.com
 * @LastEditTime: 2025-05-23 11:01:23
 * @FilePath: \zbf_master_ch584m\bsp\inc\bsp_valve.h
 * @Description: 
 * @
 * @Copyright (c) 2025 by ${git_name_email}, All Rights Reserved. 
 */
/***
 * @Author: mbw
 * @Date: 2024-12-09 11:40:04
 * @LastEditors: mbw && 1600520629@qq.com
 * @LastEditTime: 2024-12-12 17:50:12
 * @FilePath: \ble_-tyq_-bjq_-ch584-m\bsp\inc\bsp_valve.h
 * @Description:
 * @
 * @Copyright (c) 2024 by ${git_name_email}, All Rights Reserved.
 */
#ifndef __BSP_VALVE_H__
#define __BSP_VALVE_H__

#include "CH58x_common.h"

#define MAX_VALVE_NUM 8

typedef enum
{
    kValveCmdCtr = 0X01,                  // 控制命令
    kValveCmdReg,                         // 注册命令
    kValveCmdRem,                         // 移除命令
    kValveCmdRep,                         // 替换命令
    kValveCmdRemAll,                      // 移除所有的阀门地址
    kValveEventStatus,                    // 阀门状态包
    kValveConncetStatus,                  // 阀门连接状态

    kValveCmdOverPressure,                // 超压关阀
    kValveCmdUnderPressure,               // 欠压关阀
    kValveCmdOverCurrent,                 // 过流关阀
    kValveCmdMicroLeak,                   // 微漏关阀
    kValveCmdTimer,                       // 定时关阀
    kValveCmdOpenWithStove,               // 开灶开阀
    kValveCmdCloseWithStove,              // 关灶关阀
    kValveCmdOverTemperature,             // 超温关阀
    kValveCmdDelayClose,                  // 延时关阀
    kValveCmdManualClose,                 // 手动关阀

    kValveCmdMax,                         // 枚举最大值
} ValveCmdType;
typedef enum
{
    WirelessValveClose = 0x01,
    WirelessValveOpen,
} WireLessState;

// 阀门类型
typedef enum
{
    kTyq = 0X01,
    kZbf,
    kDcf,
} TeVavleType;

typedef enum
{
    kCmdCfg = 0X01,
    kCmdCloseVavle, //关阀
    kCmdOpenVavle,//开阀
    kCmdData,//命令数据（心跳数据）
    kRespOverPressure,                // 超压关阀
    kRespUnderPressure,               // 欠压关阀
    kRespOverCurrent,                 // 过流关阀
    kRespMicroLeak,                   // 微漏关阀
    kRespTimer,                       // 定时关阀
    kRespOpenWithStove,               // 开灶开阀
    kRespCloseWithStove,              // 关灶关阀
    kRespOverTemperature,             // 超温关阀
    kRespDelayClose,                  // 延时关阀
    kRespManualClose,                 // 手动关阀
} TeFrameCmd;

/*
无线调压阀编号
无线调压阀 MAC 地址
无线调压阀连接状态
无线调压阀开关状态
无线调压阀温度
无线调压阀进口压力
无线调压阀出口压力
无线调压阀大气压
*/
typedef struct __attribute__((packed))
{
    uint8_t valve_id;
    uint8_t valve_mac[6];
    uint8_t valve_connct_status;
    uint8_t valve_switch_status;
    uint8_t valve_temp;
    uint32_t valve_in_pressure;
    uint32_t valve_out_pressure;
    uint32_t valve_atm_pressure;
    uint8_t valve_type;
    uint8_t valve_bat;
    uint8_t valve_hum;//阀门湿度
    int8_t valve_rssi;//阀门rssi
}valve_data;

typedef struct valve_data_list
{
    uint8_t valve_num;
    valve_data valve_data[MAX_VALVE_NUM];
} valve_data_list_t;

extern valve_data_list_t valve_list;

void BSP_Valve_Init(void);
int BSP_Bt_Valve_Ctr(uint8_t *data, uint8_t len);
int BSP_Bt_Register_Valve(uint8_t *data, uint8_t len);
int BSP_Bt_Remove_Valve(uint8_t *data, uint8_t len);
int BSP_Bt_Replace_Valve(uint8_t *data, uint8_t len);
void BSP_Bt_Valve_Updata(void);
int BSP_Bt_Remove_All_Valve(void);
int BSP_Bt_Valve_Resp(ValveCmdType cmd, uint8_t id, uint8_t *mac_addr, uint8_t state);

#endif // ! __BSP_VALVE_H__