/********************************** (C) COPYRIGHT *******************************
 * File Name          : main.c
 * Author             : WCH
 * Version            : V1.1
 * Date               : 2020/08/06
 * Description        : 外设从机应用主函数及任务系统初始化
 *********************************************************************************
 * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
 * Attention: This software (modified or not) and binary are used for
 * microcontroller manufactured by Nanjing Qinheng Microelectronics.
 *******************************************************************************/

/******************************************************************************/
/* 头文件包含 */
#include "CONFIG.h"
#include "HAL.h"
#include "gattprofile.h"
#include "peripheral.h"

/*********************************************************************
 * GLOBAL TYPEDEFS
 */
__attribute__((aligned(4))) uint32_t MEM_BUF[BLE_MEMHEAP_SIZE / 4];

#if(defined(BLE_MAC)) && (BLE_MAC == TRUE)
const uint8_t MacAddr[6] = {0x84, 0xC2, 0xE4, 0x03, 0x02, 0x02};
#endif

/*********************************************************************
 * @fn      Main_Circulation
 *
 * @brief   主循环
 *
 * @return  none
 */
__HIGH_CODE
__attribute__((noinline))
void Main_Circulation()
{
    while(1)
    {
        TMOS_SystemProcess();
    }
}

/*********************************************************************
 * @fn      main
 *
 * @brief   主函数
 *
 * @return  none
 */
int main(void)
{
#if(defined(DCDC_ENABLE)) && (DCDC_ENABLE == TRUE)
    PWR_DCDCCfg(ENABLE);
#endif
    SetSysClock(CLK_SOURCE_PLL_60MHz);
#if(defined(HAL_SLEEP)) && (HAL_SLEEP == TRUE)
    GPIOA_ModeCfg(GPIO_Pin_All, GPIO_ModeIN_PU);
    GPIOB_ModeCfg(GPIO_Pin_All, GPIO_ModeIN_PU);
#endif

    // 12V_EN
    GPIOA_ResetBits(GPIO_Pin_13);
    GPIOA_ModeCfg(GPIO_Pin_13, GPIO_ModeOut_PP_5mA);

    // EMV_CTRL
    GPIOB_ResetBits(GPIO_Pin_13);
    GPIOB_ModeCfg(GPIO_Pin_13, GPIO_ModeIN_PD);

    // LED
    GPIOA_ResetBits(GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_15);
    GPIOA_ModeCfg(GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_15, GPIO_ModeIN_PD);

    // KEY
    GPIOB_SetBits(GPIO_Pin_14);
//    由外部上拉电阻了
    GPIOB_ModeCfg(GPIO_Pin_14, GPIO_ModeIN_Floating);

    // ADC_VBAT
    // GPIOAGPPCfg(ENABLE, RB_PIN_PA4_15_DIS);
    // R16_PIN_ANALOG_IE != RB_PIN_PA4_15_DIS;

    // R32_PIN_CONFIG2

    // GPIOA_ResetBits(GPIO_Pin_1);
    GPIOA_ModeCfg(GPIO_Pin_14, GPIO_ModeIN_Floating);

#ifdef DEBUG
    GPIOB_SetBits(bTXD0);
    GPIOB_ModeCfg(bTXD0, GPIO_ModeOut_PP_5mA);
    UART0_DefInit();
#endif
    PRINT("%s\n", VER_LIB);
    CH59x_BLEInit();
    HAL_Init();
    GAPRole_PeripheralInit();
    Peripheral_Init();
    Main_Circulation();
}

/******************************** endfile @ main ******************************/