CIU32_L051_M307R/bsp/src/bsp_flash.c

/*
 * @Author: mbw
 * @Date: 2024-08-22 16:15:08
 * @LastEditors: mbw && 1600520629@qq.com
 * @LastEditTime: 2024-09-20 10:39:08
 * @FilePath: \USART1_Interrupt - RT-Thread\bsp\src\bsp_flash.c
 * @Description:
 *
 * Copyright (c) 2024 by ${git_name_email}, All Rights Reserved.
 */

#include "bsp_flash.h"
#include "bsp_rtc.h"
#include "rthw.h"
#include "stdlib.h"
#include "user_rtt.h"

#define LOG_TAG "bsp_flash" // 该模块对应的标签。不定义时，默认：NO_TAG
#define LOG_LVL LOG_LVL_DBG // 该模块对应的日志输出级别。不定义时，默认：调试级别
#include <ulog.h>           // 必须在 LOG_TAG 与 LOG_LVL 下面

#define FSTPG_WORD_COUNT (0x40U)

// #define TEST       512
#define MAX(a, b) ((a) > (b)) ? (a) : (b)

ErrorStatus Flash_Write_Record(TeRecord record);

const uint32_t hr_start_addr[7] = {FLASH_HR_ALARM_START_ADDR, FLASH_HR_ALARM_RCY_START_ADDR,
                                   FLASH_HR_FAULT_START_ADDR, FLASH_HR_FAULT_RCY_START_ADDR,
                                   FLASH_HR_power_down_START_ADDR, FLASH_HR_POWER_ON_START_ADDR,
                                   FLASH_HR_SENSOR_FAILURE_START_ADDR};

/*各历史数据的条数*/
const uint16_t hr_record_max_num[7] = {HR_ALARM_MAX_NUM, HR_ALARM_RCY_MAX_NUM,
                                       HR_FAULT_MAX_NUM, HR_FAULT_RCY_MAX_NUM,
                                       HR_power_down_MAX_NUM, HR_POWER_ON_MAX_NUM,
                                       HR_SENSOR_FAILURE_MAX_NUM};

const uint8_t hr_record_pages[7] = {HR_ALARM_PAGES, HR_ALARM_RCY_PAGES,
                                    HR_FAULT_PAGES, HR_FAULT_RCY_PAGES,
                                    HR_power_down_PAGES, HR_POWER_ON_PAGES,
                                    HR_SENSOR_FAILURE_PAGES};

/*定义历史数据所在的真实起始页*/
const uint8_t hr_record_start_page_num[7] = {FLASH_HR_ALARM_PAGE, FLASH_HR_ALARM_RCY_PAGE,
                                             FLASH_HR_FAULT_PAGE, FLASH_HR_FAULT_RCY_PAGE,
                                             FLASH_HR_power_down_PAGE, FLASH_HR_POWER_ON_PAGE,
                                             FLASH_HR_SENSOR_FAILIRE_START_PAGE};

/*定义信息页的数据地址*/
const uint32_t hr_record_info_start_addr[9] = {
    FLASH_CONFIG_INFO_INIT_FLAG_ADDR,
    FLASH_FACTORY_TIME_ADDR,
    FLASH_EXPIRATION_TIME_ADDR,
    FLASH_LOW_ALARM_VALUE_ADDR,
    FLASH_HIGH_ALARM_VALUE_ADDR,
    FLASH_SOFTWARE_VERSION_ADDR,
    FLASH_HARDWARE_VERSION_ADDR,
    FLASH_COMPANY_NAME_ADDR,
    FLASH_UPDATE_TIME_ADDR,
};

rt_ubase_t level = 0;
static void BSP_Flash_UnLock(void)
{
    std_flash_unlock();
}

static void BSP_Flash_Lock(void)
{
    std_flash_lock();
    // rt_hw_interrupt_enable(interrupt_value);
}

static void Flash_Interrupt_Disable(void)
{
    level = rt_hw_interrupt_disable();
}

static void Flash_Interrupt_Enable(void)
{
    rt_hw_interrupt_enable(level);
}

// 计算校验和的函数
uint8_t Sum_Check(TuFlashHrRecordFrame frame)
{
    return (frame.time.year + frame.time.month + frame.time.day + frame.time.hour + frame.time.minute) & CHECKSUM_MASK;
}

#if 0
static size_t Flash_Read(uint32_t addr, uint8_t *buf, size_t len)
{
    size_t read_len = 0;

    for (size_t i = 0; i < len; i++, buf++, addr++, read_len++)
    {
        *buf = *(uint8_t *)addr;
    }

    return read_len;
}
#endif
static size_t Flash_ReadWord(uint32_t addr, uint32_t *buf, size_t len)
{
    size_t read_len = 0;

    if ((addr & 0x03) != 0) // 地址4字节对齐
    {
        RTT_LOG_E("addr %#X is not aligned\r\n", addr);
        return ERROR;
    }
    for (size_t i = 0; i < len; i++, read_len++)
    {
        buf[i] = ((uint32_t *)addr)[i]; //
        if (buf[i] != ((uint32_t *)addr)[i])
        {
            RTT_LOG_E("Flash_Read Data Mismatch at addr %#X, expected %d got %d", addr, *(uint32_t *)buf, *(uint32_t *)addr);
            return ERROR;
        }
    }
    return read_len;
}
/**
 * @description: 向Flash中写入数据
 * @param {uint32_t} addr
 * @param {uint8_t} *buf
 * @param {size_t} len
 * @return {*}
 */
static std_status_t Flash_WriteWord(uint32_t addr, uint32_t write_data)
{
    if ((addr & 0x03) != 0) // 地址4字节对齐
    {
        LOG_E("addr %#X is not aligned\r\n", addr);
        return ERROR;
    }
    /* 清除错误标志 */
    std_flash_clear_flag(FLASH_FLAG_ALL_ERR);
    BSP_Flash_UnLock();
    if (std_flash_get_lock_status() == false)
    {
        /* 进入编程模式 */
        // std_flash_program_enable();
        Flash_Interrupt_Disable();
        if (std_flash_word_program(addr, write_data) != SUCCESS) // 写入操作 字节写入
        {
            Flash_Interrupt_Enable();
            LOG_D("addr = %#X, read %d", addr, *(uint32_t *)addr);

            // std_flash_program_disable();
            BSP_Flash_Lock();
            return ERROR;
        }
        Flash_Interrupt_Enable();
        // std_flash_program_disable();
        BSP_Flash_Lock();
        if (*(uint32_t *)addr != write_data)
        {
            LOG_D("Flash_Write Data Mismatch at addr %#X, expected %d got %d", addr, write_data, *(uint32_t *)addr);
            /* 退出编程模式 */

            return ERROR;
        }
        rt_thread_mdelay(2);
    }

    return SUCCESS;
}

#if 0
#if defined(__CC_ARM)
#pragma arm section code = "FAST_PROGRAM"
#elif defined(__ICCARM__)
__ramfunc
#elif defined(__GNUC__)
__attribute__  ((section (".RamFunc")))
#endif

/**
* @brief  Flash快速编程，往目标地址快速编程半页数据
* @param  address 编程地址
* @param  data_buf 编程数据
* @retval std_status_t 本函数执行结果
*/
std_status_t BSP_Flash_Fast_Write(uint32_t address, uint32_t *data_buf)
{
    std_status_t status = STD_OK;
    uint32_t prog_count = 0;
    
    /* 启动快速编程模式 */
    std_flash_fast_program_enable();
    /* 向目标地址写入数据 */
    for (prog_count=0; prog_count < FSTPG_WORD_COUNT; prog_count++)
    {
        ((uint32_t *)address)[prog_count] = data_buf[prog_count];
        /* 查询等待BSY标志被清除 */
        while ((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY);
        
        /* 若出现错误，则退出编程循环 */
        if (FLASH->SR & FLASH_FLAG_ALL_ERR)
        {
            RTT_LOG_E("FLASH_SR = %#X", FLASH->SR);
            RTT_LOG_E("Flash_Write Error at addr %#X, expected %X got %X", address, data_buf[prog_count], ((uint32_t *)address)[prog_count]);
            status = STD_ERR;
            break;
        }
    }
    
    /* 查询等待FSTPG_MODE状态被自动清零 */
    while ((FLASH->CR & FLASH_CR_FSTPG_MODE) == FLASH_CR_FSTPG_MODE);
    
    /* 清除Flash标志 */
    FLASH->SR = (FLASH_FLAG_ALL_ERR | FLASH_SR_EOP);
    
    return (status);
}

#if defined(__CC_ARM)
#pragma arm section
#endif
/**
 * @brief  Flash快速编程流程
 * @param  address 编程地址
 * @param  data_buf 编程数据
 * @retval std_status_t 本函数执行结果
 */
ErrorStatus BSP_Flash_Fast_Program(uint32_t address, uint32_t *data_buf)
{
    std_status_t status = STD_OK;
    uint32_t  prog_count;

       /* 检查Flash上一次操作忙状态、错误状态 */
    // status = std_flash_wait_for_last_operation(FLASH_WAIT_PROGRAM);
    // if(status == STD_OK)
    // {
            /* 进入编程模式 */
            std_flash_program_enable();
            /* 短时间屏蔽中断 */
            Flash_Interrupt_Disable();
            /* 执行快速编程 */
            if(BSP_Flash_Fast_Write(address, data_buf) != STD_OK)
            {
                status = STD_ERR;
                RTT_LOG_E("Flash_Fast_Write status ERROR %d", status);
            }
            /* 恢复中断 */
            Flash_Interrupt_Enable();
        
            /* 退出编程模式 */
            std_flash_program_disable();
            rt_thread_mdelay(2);
            /* 快速编程中无法对Flash执行读操作，需在编程结束后统一校验数据 */
            if (status == STD_OK)
            {
                for (prog_count = 0; prog_count < FSTPG_WORD_COUNT; prog_count++)
                {
                    if (((__IO uint32_t *)address)[prog_count] != data_buf[prog_count])
                    {
                        RTT_LOG_E("Flash_Fast_Write Data Mismatch at addr %#X, expected %d got %d", address + prog_count * 4, data_buf[prog_count], ((__IO uint32_t *)address)[prog_count]);
                        status = STD_ERR;
                        break;
                    }
                    else
                    {
                        RTT_LOG_D("Flash_Fast_Write Data Match at addr %#X, expected %d got %d", address + prog_count * 4, data_buf[prog_count], ((__IO uint32_t *)address)[prog_count]);
                    }
                }
            }
    // }
    return (status);
}


ErrorStatus BSP_Flash_Program_Page(uint32_t address, uint32_t *data_buf)
{
     std_status_t status;
        /* 清除错误标志 */
    std_flash_clear_flag(FLASH_FLAG_ALL_ERR);
        
    /* Flash控制寄存器解锁 */
    BSP_Flash_UnLock();
    
    if (std_flash_get_lock_status() == false)
    {
        /* 页擦第48页 */
        status = std_flash_page_erase(FLASH_HR_INFO_PAGE);
        /* 擦除异常，加入自定义处理代码 */
        while(status != STD_OK)
        {
            RTT_LOG_E("Flash_Erase Page %d", FLASH_HR_INFO_PAGE);
            return STD_ERR;
        }

        /* 快速编程64个字：前半页 */
        status = BSP_Flash_Fast_Program(address, data_buf);
        /* 快速编程异常，加入自定义处理代码 */
        while(status != STD_OK)
        {
            RTT_LOG_E("Flash_Fast_Write Page %d", FLASH_HR_INFO_PAGE);
            return STD_ERR;
        }

        /* 快速编程64个字：后半页 */
        status = BSP_Flash_Fast_Program((address + (FSTPG_WORD_COUNT << 2)), data_buf);
        /* 快速编程异常，加入自定义处理代码 */
        while(status != STD_OK)
        {
            RTT_LOG_E("Flash_Fast_Write Page %d", FLASH_HR_INFO_PAGE);

            return STD_ERR;
        }
        /* Flash控制寄存器加锁 */
        BSP_Flash_Lock();
    }
    return STD_OK;
}
#endif

#if 0
static std_status_t Flash_WritePage(uint32_t addr, uint32_t *buf, size_t len)
{
    std_status_t status = SUCCESS;

    if ((addr & 0x03) != 0) // 地址4字节对齐
    {
        LOG_E("addr %#X is not aligned\r\n", addr);
        return ERROR;
    }
    for (int i = 0; i < len; i++) // 页写入的WORD数
    {
        status = Flash_WriteWord((addr + i * sizeof(uint32_t)), *(buf + i * sizeof(uint32_t))); // 注意：地址增加应按uint32_t大小增加
        if (status != SUCCESS)
        {
            return status; // 返回错误状态
        }
    }
    return status; // 如果所有写入成功，返回SUCCESS
}
#endif

std_status_t Flash_ErasePage(uint32_t index)
{
    std_flash_unlock();
    RTT_LOG_D("ErasePage %d", index);
    Flash_Interrupt_Disable();
    std_status_t status = std_flash_erase(FLASH_ERASE_PAGE, index);
    Flash_Interrupt_Enable();
    std_flash_lock();
    return status;
}

/**
 * @description: 擦除产品信息页
 * @return {*}
 */
void Flash_ErasePage_ConfigInfo(void)
{
    if (Flash_ErasePage(FLASH_HR_INFO_PAGE) != SUCCESS)
    {
        RTT_LOG_E("error_page = %#x\r\n");
    }
}

ErrorStatus BSP_Flash_Program_InfoPage(uint32_t address, uint32_t *data_buf)
{
    ErrorStatus ret = ERROR;

    for (uint32_t i = 0; i < FLASH_PAGE_RECORD_WORD_NUM; i++)
    {
        ret = Flash_WriteWord(address + i * 4, data_buf[i]);
        if (ret != SUCCESS)
        {
            LOG_E("BSP_Flash_Program_InfoPage failed");
            return ERROR;
        }
    }
    return ret;
}

/**
 * @description: 写产品信息页（最后一页）
 * @param {uint8_t*} frame
 * @return {*}
 */
ErrorStatus Flash_Write_ConfigInfo(uint32_t *buf)
{
    return BSP_Flash_Program_InfoPage(FLASH_CONFIG_INFO_START_ADDR, buf);
}

/*获取当前页号*/
uint32_t Flash_Get_Current_Page(uint32_t addr)
{
    return (addr - FLASH_START_ADDR) / FLASH_PAGE_BYTE_SIZE;
}

/**
 * @description: 擦除历史记录区的页
 * @param {TeRecord} addr  需要擦除的页相对于其项目起始页的偏移量
 * @return {*}
 */
ErrorStatus Flash_ErasePage_Records(TeRecord record, uint8_t page_offset)
{
    ErrorStatus flag = SUCCESS;

    uint8_t erase_page = Flash_Get_Current_Page(hr_start_addr[record] + page_offset * FLASH_PAGE_BYTE_SIZE);

    if (erase_page != hr_record_start_page_num[record] + page_offset)
    {
        RTT_LOG_E("Flash_ErasePage_Records failed erase_page: %#X !=  %#X",
                  erase_page, hr_record_start_page_num[record] + page_offset);

        return ERROR;
    }
    if (Flash_ErasePage(erase_page) != SUCCESS)
    {
        RTT_LOG_E("Flash_ErasePage failed\r\n");

        return ERROR;
    }
    for (uint16_t i = 0; i < FLASH_PAGE_BYTE_SIZE; i++) // 检查擦除是否完整
    {
        if (*(uint32_t *)((hr_start_addr[record] + FLASH_PAGE_BYTE_SIZE * erase_page) + i) != FLASH_DEFAULT_VALUE)
        {
            RTT_LOG_E("Flash_ErasePage failed\r\n");

            return ERROR;
        }
    }

    return flag;
}

/**
 * @description: 擦除数据记录区
 * @return {*}
 */
ErrorStatus BSP_Flash_EraseRecodrs(void)
{

    /*擦除所有的历史记录区*/
    for (TeRecord record = kRecordAlarm; record < kRecordSensorFailure; record++)
    {
        for (uint8_t i = 0; i < hr_record_pages[record]; i++)
        {
            if (Flash_ErasePage(hr_record_start_page_num[record] + i) != SUCCESS)
            {
                RTT_LOG_E("Flash_ErasePage_Records failed\r\n");

                return ERROR;
            }
        }
    }
    return SUCCESS;
}
/**
 * @description: 先读再擦，以确保原有数据不会被擦除
 * @param {uint8_t} *page_buf
 * @return {*}
 */
void Flash_ErasePage_ReadConfigInfo(uint32_t *page_buf)
{
    Flash_ReadWord(FLASH_CONFIG_INFO_START_ADDR, page_buf, FLASH_PAGE_RECORD_WORD_NUM);
    Flash_ErasePage_ConfigInfo();
}

#if 1
/**
 * @description: 获取产品的出厂或到期时间
 * @return {*}
 */
ErrorStatus Flash_GetProductTimeLimit(TuFlashHrRecordFrame *pLimitTime, TeFlashProductTimeLimitId id)
{
    if (id == kFactoryTimeId)
    {
        pLimitTime->hr_data = *(uint32_t *)FLASH_FACTORY_TIME_ADDR;

        if (pLimitTime->hr_data == FLASH_DEFAULT_VALUE)
        {
            RTT_LOG_E("FactoryTime is not set\r\n");

            return ERROR;
        }
        if (pLimitTime->time.check_sum != Sum_Check(*pLimitTime))
        {
            RTT_LOG_E("FactoryTime check_sum error\r\n");
            return ERROR;
        }
        RTT_LOG_D("Flash_Read_FactoryTime:%04d-%02d-%02d,%02d:%02d",
                  BASE_YEAR + pLimitTime->time.year, pLimitTime->time.month, pLimitTime->time.day,
                  pLimitTime->time.hour, pLimitTime->time.minute);
        return SUCCESS;
    }
    else if (id == kExpirationTimeId)
    {
        pLimitTime->hr_data = *(uint32_t *)FLASH_EXPIRATION_TIME_ADDR;
        if (pLimitTime->hr_data == FLASH_DEFAULT_VALUE)
        {
            RTT_LOG_E("ExpirationTime is not set\r\n");

            return ERROR;
        }
        if (pLimitTime->time.check_sum != Sum_Check(*pLimitTime))
        {
            RTT_LOG_E("ExpirationTime check_sum error\r\n");
            return ERROR;
        }
        RTT_LOG_D("Flash_Read_ExpirationTime:%04d-%02d-%02d,%02d:%02d",
                  BASE_YEAR + pLimitTime->time.year, pLimitTime->time.month, pLimitTime->time.day,
                  pLimitTime->time.hour, pLimitTime->time.minute);
        return SUCCESS;
    }

    return ERROR;
}

/**
 * @description: 设置产品的出厂或到期时间
 * @param {uint16_t} year
 * @param {uint8_t} mon
 * @param {uint8_t} day
 * @param {uint8_t} hour
 * @param {uint8_t} min
 * @param {TeFlashProductTimeLimitId} id
 * @return {*}
 */
void Flash_SetProductTimeLimit(uint16_t year, uint8_t mon, uint8_t day, uint8_t hour, uint8_t min, TeFlashProductTimeLimitId id)
{
    TuFlashHrRecordFrame LimitTime;
    TuFlashHrRecordFrame ReadLimitTime;
    uint32_t page_buf[FLASH_PAGE_RECORD_WORD_NUM] = {0}; // 暂存最后一页的值

    Flash_ErasePage_ReadConfigInfo(page_buf);

    // page_buf[kFlashInitFlag] = FLASH_FIRST_INIT_VALUE;

    LimitTime.time.year      = year - BASE_YEAR;
    LimitTime.time.month     = mon;
    LimitTime.time.day       = day;
    LimitTime.time.hour      = hour;
    LimitTime.time.minute    = min;
    LimitTime.time.check_sum = Sum_Check(LimitTime);

    if (id == kFactoryTimeId)
    {
        page_buf[kFlashFactoryTime] = LimitTime.hr_data;
    }
    else if (id == kExpirationTimeId)
    {
        page_buf[kFlashExpirationTime] = LimitTime.hr_data;
    }
    // RTT_LOG_D("Flash_SetProductTimeLimit((%d)):%04d-%02d-%02d,%02d:%02d ", id, year, mon, day, hour, min);
    Flash_Write_ConfigInfo(&page_buf[0]);
    Flash_GetProductTimeLimit(&ReadLimitTime, id);
}

#endif

uint32_t ProductTimeLimit(uint16_t year, uint8_t mon, uint8_t day, uint8_t hour, uint8_t min)
{
    TuFlashHrRecordFrame LimitTime;

    LimitTime.time.year      = year - BASE_YEAR;
    LimitTime.time.month     = mon;
    LimitTime.time.day       = day;
    LimitTime.time.hour      = hour;
    LimitTime.time.minute    = min;
    LimitTime.time.check_sum = Sum_Check(LimitTime);

    return (uint32_t)LimitTime.hr_data;
}

/**
 * @description: 产品信息初始化，
 * @return {*}
 */
int BSP_Flash_Init(void)
{

    if (*(uint32_t *)FLASH_CONFIG_INFO_START_ADDR != FLASH_FIRST_INIT_VALUE)
    {
        uint32_t info_page_buf[FLASH_PAGE_RECORD_WORD_NUM] = {0};

        // TODO: 此处需要完善，比如写入初始化标志位,写入产品信息，写入出厂时间，写入到期时间

        info_page_buf[kFlashInitFlag] = FLASH_FIRST_INIT_VALUE;

        info_page_buf[kFlashFactoryTime]    = ProductTimeLimit(2024, 1, 2, 3, 4);
        info_page_buf[kFlashExpirationTime] = ProductTimeLimit(2024 + 10, 1, 2, 3, 4);
        info_page_buf[kFlashLowAlarmValue]  = 0x0A; // 10%LEL
        info_page_buf[kFlashHighAlarmValue] = 0x32; // 50%LEL
        // info_page_buf[kFlashSoftwareVersion] = XXX;
        // info_page_buf[kFlashHardwareVersion] = XXX;
        // info_page_buf[kFlashCompanyName]     = XXX;
        // info_page_buf[kFlashUpdateTime]      = XXX;

        BSP_Flash_EraseRecodrs();     // 擦除历史数据区
        Flash_ErasePage_ConfigInfo(); // 擦除配置信息

        if (Flash_Write_ConfigInfo(info_page_buf) != STD_OK)
        {
            RTT_LOG_E("Flash_Write_ConfigInfo failed");
            return RT_ERROR;
        }
    }
    return RT_EOK;
}
INIT_ENV_EXPORT(BSP_Flash_Init);

#if 1
/**
 * @description: 获取索引信息
 * @param {TeRecord} record
 * @return {*}
 */
TsRecordIndex Flash_GetIndex_Pos(TeRecord record)
{
    uint32_t index_addr       = RT_NULL;
    TsRecordIndex Index_Frame = {0};

    uint32_t start_addr_default      = hr_start_addr[record];
    uint32_t hr_record_pages_default = hr_record_pages[record];

    for (uint8_t page = 1; page <= hr_record_pages_default; page++) // 遍历对应项的历史数据扇区
    {
        for (uint8_t i = 0; i < FLASH_HR_PAGE_RECORD_NUM; i++) // 获取扇区偏移量
        {
            index_addr = (start_addr_default + FLASH_PAGE_BYTE_SIZE * (page - 1) + HR_RECORD_FRAME_LEN * i);
            if (*(uint32_t *)index_addr == FLASH_DEFAULT_VALUE)
            {
                /*获取最新的数据所在位置，如果值为0xFFFFFFFF，则表示该页有空位，是最新的页*/
                if (page < hr_record_pages_default) // 当前页不是最后一页
                {
                    if (*(uint32_t *)(index_addr + FLASH_PAGE_BYTE_SIZE) == FLASH_DEFAULT_VALUE)
                    {
                        /* 没进行循环写入*/
                        Index_Frame.hr_start_addr = start_addr_default;
                        Index_Frame.hr_index_addr = index_addr;
                        Index_Frame.hr_num        = (index_addr - start_addr_default) / HR_RECORD_FRAME_LEN;
                        Index_Frame.hr_page       = page;

                        return Index_Frame;
                    }
                    else // 已经开始循环了
                    {
                        Index_Frame.hr_start_addr = (index_addr + FLASH_PAGE_BYTE_SIZE);
                        Index_Frame.hr_index_addr = index_addr;
                        Index_Frame.hr_num        = hr_record_max_num[record];
                        Index_Frame.hr_page       = page;

                        return Index_Frame;
                    }
                }
                else // 当前页是最后一页，那么首地址应该在第一页，其偏移量是最后一页的偏移量
                {
                    Index_Frame.hr_start_addr = (start_addr_default + HR_RECORD_FRAME_LEN * i);
                    Index_Frame.hr_index_addr = index_addr;
                    Index_Frame.hr_num        = hr_record_max_num[record];
                    Index_Frame.hr_page       = page;
                    if (page == 1) // 只有一条数据,则索引地址应该在第一页
                    {
                        Index_Frame.hr_start_addr = start_addr_default;
                        Index_Frame.hr_index_addr = Index_Frame.hr_start_addr;
                        if (*(uint32_t *)(start_addr_default) == FLASH_DEFAULT_VALUE)
                        {
                            Index_Frame.hr_num = 0;
                        }
                    }

                    return Index_Frame;
                }
            }
        }
    }
    RTT_LOG_E("Flash_GetIndex_Pos Error!");
    return Index_Frame;
}
#endif

/**
 * @description:
 * @param {TuFlashHrRecordFrame} *pHrRecord
 * @param {TeRecord} record
 * @param {uint8_t} index
 * @return {*}
 */
ErrorStatus Flash_Read_Record(TuFlashHrRecordFrame *pHrRecord, TeRecord record, size_t index)
{
    uint32_t index_addr               = 0;
    TuFlashHrRecordFrame RecoderFrame = {0};
    TsRecordIndex Index_Frame         = Flash_GetIndex_Pos(record); // 已存储的数量

    uint32_t start_addr_default      = hr_start_addr[record];
    uint32_t hr_record_pages_default = hr_record_pages[record];
    uint8_t sum_check                = 0;
    if ((index <= hr_record_max_num[record]) && (index > 0))
    {
        if (index <= Index_Frame.hr_num)
        {
            {
                if (Index_Frame.hr_start_addr == start_addr_default) // 是默认的起始地址,则读取数据就是对应的偏移量
                {
                    index_addr = start_addr_default + (index - 1) * HR_RECORD_FRAME_LEN;
                }
                else
                {
                    if ((Index_Frame.hr_start_addr + index * HR_RECORD_FRAME_LEN) <=
                        hr_record_pages_default * FLASH_PAGE_BYTE_SIZE + start_addr_default) // 没超过所在项目的页最大地址，正常读取,此时应该在缓存页
                    {
                        RTT_LOG_D("read :hr_start_addr1 = %#x", Index_Frame.hr_start_addr);
                        index_addr = Index_Frame.hr_start_addr + (index - 1) * HR_RECORD_FRAME_LEN;
                    }
                    else // 超过了所在项目的最大地址，此时应该循环了
                    {
                        RTT_LOG_D("read :hr_start_addr2 = %#x", Index_Frame.hr_start_addr);
                        index_addr = (Index_Frame.hr_start_addr + (index - 1) * HR_RECORD_FRAME_LEN - hr_record_pages[record] * FLASH_PAGE_BYTE_SIZE);
                    }
                }
            }
            {
                RecoderFrame.hr_data = (*(uint32_t *)index_addr);
                sum_check            = Sum_Check(RecoderFrame);

                if (RecoderFrame.time.check_sum == sum_check)
                {
                    pHrRecord->hr_data = RecoderFrame.hr_data; // 赋值后读出，看对不对

                    RTT_LOG_D("Flash_Read_(%d)Record(%d):%04d-%02d-%02d,%02d:%02d", record, index,
                              BASE_YEAR + pHrRecord->time.year, pHrRecord->time.month, pHrRecord->time.day,
                              pHrRecord->time.hour, pHrRecord->time.minute);

                    RTT_LOG_D("read :hr_start_addr = %#x, index_addr: %#x, hr_num: %d, hr_page:%d, read_data :  %#X\r\n",
                              Index_Frame.hr_start_addr, index_addr, Index_Frame.hr_num, Index_Frame.hr_page, pHrRecord->hr_data);

                    return SUCCESS;
                }
                else
                {
                    RTT_LOG_E("read :hr_start_addr = %#x, index_addr: %#x, hr_num: %d, hr_page:%d, read_data :  %#X",
                              Index_Frame.hr_start_addr, index_addr, Index_Frame.hr_num, Index_Frame.hr_page, RecoderFrame.hr_data);

                    RTT_LOG_E("Flash_GetMaxNum((%d)_Records(%d) Sum_Check(%#X) != check_sum(%#X),index_addr :%#X\r\n",
                              Index_Frame.hr_num, record, sum_check, RecoderFrame.time.check_sum, index_addr);

                    pHrRecord->hr_data = 0;

                    return ERROR;
                }
            }
        }
        else
        {
            RTT_LOG_E("index num (%d) > Actual storage num %d", index, Index_Frame.hr_num);
            pHrRecord->hr_data = 0;
            return ERROR;
        }
    }
    else
    {
        RTT_LOG_E("index num (%d) > hr record max num %d && index > 0", index, hr_record_max_num[record]);
        pHrRecord->hr_data = 0;
        return ERROR;
    }
}

/**
 * @description: 向对应的历史数据存储区写入一次数据
 * @param {TeRecord} record
 * @return {*}
 */
ErrorStatus Flash_Write_Record(TeRecord record)
{
    TsRecordIndex Index_Frame;
    TuFlashHrRecordFrame RecoderFrame = {0};
    // uint8_t rtctime[3] = {0}, rtcdate[3] = {0};

    if (record == kRecordSensorFailure && *(uint32_t *)hr_start_addr[record] != FLASH_DEFAULT_VALUE) // 传感器故障记录，且已经写入过数据，则不再写入
    {
        RecoderFrame.hr_data = *(uint32_t *)hr_start_addr[record];

        RTT_LOG_E("Flash_Write_(%d)Record(%d) num >= recorded Max num(%d)", record, Index_Frame.hr_num, hr_record_max_num[record]);

        Flash_Read_Record(&RecoderFrame, record, Index_Frame.hr_num); // 读取刚才写入数据

        return ERROR;
    }
    // __cycleof__("my algorithm")
    // {
    // BSP_Rtc_Get_Calendar(rtcdate, rtctime);
    // }
    Index_Frame = Flash_GetIndex_Pos(record);
    /*这里可以使用RTC闹钟，每分钟更新一次数据，这样只需要从缓存读取数据就行，降低了访问的时间*/
    RecoderFrame.time.hour   = std_rtc_convert_bcd2bin(rtctime[0]); // h
    RecoderFrame.time.minute = std_rtc_convert_bcd2bin(rtctime[1]); // m

    RecoderFrame.time.year      = (std_rtc_convert_bcd2bin(rtcdate[0]) - 24); // y
    RecoderFrame.time.month     = std_rtc_convert_bcd2bin(rtcdate[1]);        //    m
    RecoderFrame.time.day       = std_rtc_convert_bcd2bin(rtcdate[2]);        // d
    RecoderFrame.time.check_sum = Sum_Check(RecoderFrame);

    // RTT_LOG_D("sizof TuFlashHrRecordFrame(%d)", sizeof(TuFlashHrRecordFrame));

    RTT_LOG_D("write:hr_start_addr = %#x, index_addr: %#x, hr_num: %d, hr_page:%d, write_data : %#X",
              Index_Frame.hr_start_addr, Index_Frame.hr_index_addr, Index_Frame.hr_num, Index_Frame.hr_page, RecoderFrame.hr_data);

    RTT_LOG_D("Flash_Write_(%d)Record:%04d-%02d-%02d %02d:%02d, check_sum : %#X",
              record, RecoderFrame.time.year + BASE_YEAR, RecoderFrame.time.month, RecoderFrame.time.day,
              RecoderFrame.time.hour, RecoderFrame.time.minute, RecoderFrame.time.check_sum);
    {
        /*写入数据*/

        if (Flash_WriteWord(Index_Frame.hr_index_addr, RecoderFrame.hr_data) != SUCCESS)
        {
            RTT_LOG_E("hr_write_data_error");
            RTT_LOG_E("hr_start_addr = %#x, index_addr: %#x, hr_num: %d, hr_page:%d, write_data : %#X",
                      Index_Frame.hr_start_addr, Index_Frame.hr_index_addr, Index_Frame.hr_num, Index_Frame.hr_page, RecoderFrame.hr_data);

            return ERROR;
        }
    }
    {
        /*如果把当前页写完了，要把下一页擦了，这样索引才不会出错，否则会导致索引出错*/
        if (Index_Frame.hr_index_addr == hr_start_addr[record] + (Index_Frame.hr_page) * FLASH_PAGE_BYTE_SIZE - HR_RECORD_FRAME_LEN)
        {
            RTT_LOG_I("Index_Frame.hr_index_addr = hr_start_addr[record] + i * FLASH_PAGE_BYTE_SIZE - HR_RECORD_FRAME_LEN = %#X", Index_Frame.hr_index_addr);
            if (hr_record_pages[record] - Index_Frame.hr_page > 0) // 当前页不是最后一页，还不需要返回擦
            {
                if (Flash_ErasePage(Index_Frame.hr_page + hr_record_start_page_num[record]) != SUCCESS)
                {
                    RTT_LOG_I("Erase Page %d", Index_Frame.hr_page + hr_record_start_page_num[record]);
                    return ERROR;
                }
            }
            else // 当前页是最后一页 此时需要将第一页擦除掉
            {
                if (Flash_ErasePage(hr_record_start_page_num[record]) != SUCCESS) // 擦除第一页
                {
                    RTT_LOG_I("Erase Page %d", hr_record_start_page_num[record]);
                    return ERROR;
                }
            }
        }
    }
    {
        if (Index_Frame.hr_num < hr_record_max_num[record])
        {

            Flash_Read_Record(&RecoderFrame, record, Index_Frame.hr_num + 1); // 读取刚才写入数据,此时这个hr_num实际上是会+1的，当到达最大计数之前，hr_num会+1，到了以后，就默认是最大数量条数据，所以不用加
        }
        else // 超了最大数后，每次读出来的数据都是最大数
        {
            Flash_Read_Record(&RecoderFrame, record, Index_Frame.hr_num); // 读取刚才写入数据
        }
    }

    return SUCCESS;
}

// static void TEST_Flash_Write_Record(int argc, char **argv)
// {

//     if (argc == 3)
//     {
//         TeRecord record = (TeRecord)atoi(argv[1]);
//         int num         = atoi(argv[2]);

//         for (int i = 1; i <= num; i++)
//         {
//             RTT_LOG_I("Flash_Write_(%d)Record:%d", record, i);
//             Flash_Write_Record(record);
//             rt_thread_mdelay(200); // 1min
//         }
//     }
//     else
//     {
//         LOG_E("TEST_Flash_Write_Record      --use _cmd_ [record(0~6)] [num]");
//     }
// }
// MSH_CMD_EXPORT(TEST_Flash_Write_Record, "TEST_Flash_Write_Record");

// static void TEST_Flash_Read_Record(int argc, char **argv)
// {
//     TuFlashHrRecordFrame RecoderFrame = {0};

//     if (argc == 3)
//     {
//         TeRecord record = (TeRecord)atoi(argv[1]);
//         int num         = atoi(argv[2]);
//         Flash_Read_Record(&RecoderFrame, record, num);
//     }
//     else
//     {
//         LOG_E("TEST_Flash_Read_Record      --use _cmd_ [record(0~6)] [num]");
//     }
// }
// MSH_CMD_EXPORT(TEST_Flash_Read_Record, "TEST_Flash_Read_Record");

/*获取当前项目记录数*/
uint16_t Flash_GetNum_Records(TeRecord record)
{
    TsRecordIndex Index_Frame = Flash_GetIndex_Pos(record);

    return Index_Frame.hr_num;
}

/**
 * @description: 获取总记录数
 * @param {TsTotalRecords} *pTotalRecords
 * @return {*}
 * @note:
 */
ErrorStatus Flash_GetTotalRecord(TsTotalRecords *pTotalRecords)
{
    ErrorStatus flag = ERROR;

    pTotalRecords->alarm          = Flash_GetNum_Records(kRecordAlarm) >= 256 ? 255 : Flash_GetNum_Records(kRecordAlarm);
    pTotalRecords->alarm_rcy      = Flash_GetNum_Records(kRecordAlarmRcy) >= 256 ? 255 : Flash_GetNum_Records(kRecordAlarmRcy);
    pTotalRecords->fault          = Flash_GetNum_Records(kRecordFault);
    pTotalRecords->fault_rcy      = Flash_GetNum_Records(kRecordFaultRcy);
    pTotalRecords->power_down     = Flash_GetNum_Records(kRecordPowerDown);
    pTotalRecords->power_on       = Flash_GetNum_Records(kRecordPowerOn);
    pTotalRecords->sensor_failure = Flash_GetNum_Records(kRecordSensorFailure);

    LOG_I("alarm:%d, alarm_rcy:%d, fault:%d, fault_rcy:%d, power_down:%d, power_on:%d, sensor_failure:%d",
          pTotalRecords->alarm, pTotalRecords->alarm_rcy, pTotalRecords->fault, pTotalRecords->fault_rcy,
          pTotalRecords->power_down, pTotalRecords->power_on, pTotalRecords->sensor_failure);

    flag = SUCCESS;

    return flag;
}

/**
 * @brief 获取记录时间
 * @param record_type
 * @param index
 * @param pRecordsTime
 * @return ErrorStatus
 */
ErrorStatus Flash_GetRecord(TeFrameC2 record_type, uint16_t index, TsRecordsTime *pRecordsTime)
{
    ErrorStatus flag = ERROR;
    uint16_t years   = 0;

    if (kNumOfRecords < record_type && record_type < kGetCurrentTime)
    {
        TuFlashHrRecordFrame pHrReadRecord;
        /*这里存在多种情况，其中最常见的就是没有记录，，所有情况的结果就是此基数年不存在*/
        if (Flash_Read_Record(&pHrReadRecord, (TeRecord)(record_type - 1), index) != SUCCESS)
        {
            years = pHrReadRecord.time.year;
        }
        else
        {
            years = BASE_YEAR + pHrReadRecord.time.year;
        }
        LOG_D("(%d)Flash_GetRecord[%d]:%04d-%02d-%02d,%02d:%02d",
              record_type - 1, index,
              years, pHrReadRecord.time.month, pHrReadRecord.time.day,
              pHrReadRecord.time.hour, pHrReadRecord.time.minute);

        pRecordsTime->year_h = years / 256;
        pRecordsTime->year_l = years % 256;
        pRecordsTime->month  = pHrReadRecord.time.month;
        pRecordsTime->day    = pHrReadRecord.time.day;
        pRecordsTime->hour   = pHrReadRecord.time.hour;
        pRecordsTime->minute = pHrReadRecord.time.minute;

        flag = SUCCESS;
    }

    return flag;
}