/*
 * @Author: mbw
 * @Date: 2024-08-19 10:10:06
 * @LastEditors: mbw && 1600520629@qq.com
 * @LastEditTime: 2024-09-05 08:59:16
 * @FilePath: \USART1_Interrupt - RT-Thread\user\Source\main.c
 * @Description:
 *
 * Copyright (c) 2024 by ${git_name_email}, All Rights Reserved.
 */
/************************************************************************************************/
/**
 * @file               main.c
 * @author             MCU Ecosystem Development Team
 * @brief              应用程序主流程。
 *
 *
 **************************************************************************************************
 * @attention
 * Copyright (c) CEC Huada Electronic Design Co.,Ltd. All rights reserved.
 *
 **************************************************************************************************
 */

/*------------------------------------------includes--------------------------------------------*/

#include "rtthread.h"
#include "drv_uart.h"
#include "bsp_rtc.h"
#include "drv_gpio.h"
#include "dev_pin.h"
#include "user_rtt.h"


#define LOG_TAG "main"
#define LOG_LVL LOG_LVL_DBG
#include <ulog.h>

/*--------------------------------------------variables-----------------------------------------*/
#define LED0_PIN    GET_PIN(B, 8)
/*-------------------------------------------functions------------------------------------------*/



int LED_Init(void)
{
    std_rcc_gpio_clk_enable(RCC_PERIPH_CLK_GPIOA|RCC_PERIPH_CLK_GPIOB);

    std_gpio_init_t tmp_gpio_cfg = {0};

    tmp_gpio_cfg.pin = GPIO_PIN_8;
    tmp_gpio_cfg.mode = GPIO_MODE_OUTPUT;
    tmp_gpio_cfg.output_type = GPIO_OUTPUT_PUSHPULL;
    tmp_gpio_cfg.pull = GPIO_NOPULL;
    std_gpio_init(GPIOB, &tmp_gpio_cfg);

    return RT_EOK;
}
// INIT_APP_EXPORT(LED_Init);


int main(void)
{
    // uint8_t rtctime[3], rtcdate[3];
    
    // LOG_I("test CIU32 L051 RT-Thread!\r\n");
    // LOG_I("SystemCoreClock = %d MHZ\n", SystemCoreClock/1000000);

    // UART1_SendString("test CIU32 L051 uart1 dma send RT-Thread!\r\n");
    // LPUART1_SendString("test CIU32 L051 Lpuart1 interrupt send RT-Thread!\r\n"); 
    rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
    RTT_LOG_D("LED0_PIN = %d\r\n", LED0_PIN);
    
    while (1)
    {
        rt_pin_write(LED0_PIN, PIN_HIGH);
        rt_thread_mdelay(1000);
        rt_pin_write(LED0_PIN, PIN_LOW);
        rt_thread_mdelay(1000);

        // std_gpio_reset_pin(GPIOB, GPIO_PIN_8);
        // rt_thread_mdelay(500);
        // std_gpio_set_pin(GPIOB, GPIO_PIN_8);
        // rt_thread_mdelay(500);
//        UART1_SendString("test CIU32 L051 uart1 dma send RT-Thread!\r\n");
        // LPUART1_SendString("test CIU32 L051 lpuart1 send RT-Thread!\r\n");
        /* 获取日历日期与时间 */
        // BSP_Rtc_Get_Calendar(rtcdate, rtctime);
        // LOG_D("RTC Time: %04d-%02d-%02d  %02d:%02d:%02d\n", 
        //     2000 + std_rtc_convert_bcd2bin(rtcdate[0]),std_rtc_convert_bcd2bin(rtcdate[1]), std_rtc_convert_bcd2bin(rtcdate[2]),
        //     std_rtc_convert_bcd2bin(rtctime[0]), std_rtc_convert_bcd2bin(rtctime[1]), std_rtc_convert_bcd2bin(rtctime[2]));
        
    }
}

// 软件复位函数
void System_Reset(void)
{
    NVIC_SystemReset(); // 进行软件复位
}
/* 导出到 msh 命令列表中 */
MSH_CMD_EXPORT(System_Reset, "System_Reset");