/* 头文件包含 */
#include "CONFIG.h"
#include "HAL.h"
#include "gattprofile.h"
#include "peripheral.h"
#include "bsp_bmp390.h"
#include "bsp_ml307r.h"
#include "bsp_uart.h"
#include "bsp_adc.h"
#include "bsp_motor.h"
#include "bsp_led.h"
#include "bsp_key.h"
#include "bsp_iwdg.h"
#include "bsp_valve.h"
#include "log.h"

#undef LOG_ENABLE
#define LOG_ENABLE 1

#define LOG_LVL    LOG_DEBUG

#undef LOG_TAG
#define LOG_TAG "main"

__attribute__((aligned(4))) uint32_t MEM_BUF[BLE_MEMHEAP_SIZE / 4];


__HIGH_CODE
__attribute__((noinline))
void Main_Circulation()
{
    while(1)
    {
        TMOS_SystemProcess();
        KEY_ProcessLoop();
        MultiTimerYield();
        BSP_UART3_TxLoop();
    }
}


int main(void)
{
#if(defined(DCDC_ENABLE)) && (DCDC_ENABLE == TRUE)
    PWR_DCDCCfg(ENABLE);
#endif
    HSECFG_Capacitance(HSECap_18p);
    SetSysClock(CLK_SOURCE_HSE_PLL_62_4MHz);
    // SysTick_Config( GetSysClock() / 1000 * SYSTICK_INTERVAL);  //设定嘀嗒时间1ms
#if(defined(HAL_SLEEP)) && (HAL_SLEEP == TRUE)
    GPIOA_ModeCfg(GPIO_Pin_All, GPIO_ModeIN_PD);
    GPIOB_ModeCfg(GPIO_Pin_All, GPIO_ModeIN_PD);
#endif

#ifdef DEBUG
    BSP_SHELL_Init(4000000);
#endif
    DelayMs(1000 * 3);

    ShowRestartReason();

    // log打印编译时间和编译日期
    logDebug("Compile Time: %s %s", __DATE__, __TIME__);
    logDebug("GetSysClock = %d Hz", GetSysClock());
    logDebug("Start @ChipID=%02X\n", R8_CHIP_ID);
    logError("中文测试 %2.2f", 123.456);
    logDebug("VER_LIB: %s", VER_LIB);

    uint8_t MacAddr[6];
    GetMACAddress(MacAddr);
    // 手机APP显示是倒序的[5-0],不是[0-5]
    logDebug("MacAddr: %02X:%02X:%02X:%02X:%02X:%02X", MacAddr[0], MacAddr[1], MacAddr[2], MacAddr[3], MacAddr[4], MacAddr[5]);

    CH58x_BLEInit();
    HAL_Init();
    GAPRole_PeripheralInit();
    Peripheral_Init();
    MultiTimerInstall((PlatformTicksFunction_t)BSP_Get_Tick);
    BSP_KEY_Init(app_task_handler);


    BSP_ADC_Init();

    BSP_VAVLE_Init();

    BSP_LED_Init();


    // BSP_Ml307r_Init();
    // logDebug("BSP_M1307r ok\n");

    IWDG_Init(IWDG_TIMEOUT_MS, IWDG_FEED_MS);

    BSP_PRESS_Init();

    Function_Check();

    logDebug("BSP_Get_Tick1 %d\n",BSP_Get_Tick());
    DelayMs(1000);
    logDebug("BSP_Get_Tick2 %d\n",BSP_Get_Tick());

    Main_Circulation();
    logDebug("Main_Circulation\n");
}

/******************************** endfile @ main ******************************/