#ifndef  __BSP_ML307R_H__
#define __BSP_ML307R_H__


#include "CH58x_common.h"

/*4G 模块控制引脚*/
#define ENABLE_3_8_V    GPIO_Pin_3 //PB3

#define USIM_DECT_PIN GPIO_Pin_5    //PB5
#define ML307_PWR_PIN GPIO_Pin_6    //PB6
#define ML307_RST_PIN GPIO_Pin_7    //PB7

#define ML307_UART_TX_PIN   GPIO_Pin_13 //PB13
#define ML307_UART_RX_PIN  GPIO_Pin_12  //PB12



typedef struct __attribute__((packed))
{
    uint8_t module_init_flag :  1;    //模块初始化
    uint8_t module_Sleep_flag :  1;   //模块睡眠
    uint8_t Low_Voltage_flag :  1;    //低电压
    uint8_t Regular_report_flag :  1; //定期上报

    uint8_t PowerOn_success_flag : 1; //模块开机成功
    uint8_t PowerOn_error_flag : 1;   //模块开机失败
    uint8_t PowerOff_success_flag : 1;//模块关机成功
    uint8_t PowerOff_error_flag : 1;  //模块关机失败

    uint8_t restart_success_flag : 1; //重启模块成功
    uint8_t restart_error_flag : 1;   //重启模块失败
    uint8_t sim_success_flag : 1;     //sim成功
    uint8_t sim_error_flag : 1;       //sim失败
    
    uint8_t Connect_success_flag : 1; //连接平台成功
    uint8_t Connect_error_flag : 1;   //连接平台失败
    uint8_t Valve_Open_flag : 1;      //阀门打开
    uint8_t Valve_Close_flag : 1;     //阀门关闭

    uint8_t send_complete_flag : 1;   //发送数据完成标志
    uint8_t send_error_flag : 1;      //发送数据错误标志
    uint8_t update_time_flag : 1;     //更新网络时间标志位
    uint8_t login_status_flag : 1;    //登录到服务器标志位；

    uint8_t Loop_count_flag : 3;      //循环次数标志位
    uint8_t Iot_Retry_flag : 1;       //重试标志位；

}IotFlagStruct;

extern IotFlagStruct  IotFlag_t;



static void BSP_Ml307_Power_Off(void);


void BSP_Ml307r_Init(void);
void Ml307r_Loop(void);
void BSP_Module_Emergency_Send(uint8_t* data, uint8_t len);
void BSP_ML307_StartTimeoutTimer(void);
void BSP_ML307_SetActive(void);
void BSP_ML307_SendMessage(void);
static void BSP_Read_Module(void);
static void BSP_simcom_init(void);
static void BSP_Module_Connect_CtWing(void);
#endif //!@__BSP_ML307R_H__