/********************************** (C) COPYRIGHT *******************************
 * File Name          : main.c
 * Author             : WCH
 * Version            : V1.1
 * Date               : 2020/08/06
 * Description        : 外设从机应用主函数及任务系统初始化
 *********************************************************************************
 * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
 * Attention: This software (modified or not) and binary are used for
 * microcontroller manufactured by Nanjing Qinheng Microelectronics.
 *******************************************************************************/

/******************************************************************************/
/* 头文件包含 */
#include "CONFIG.h"
#include "HAL.h"
#include "gattprofile.h"
#include "peripheral.h"

#include "bsp_wf5803.h"

/*********************************************************************
 * GLOBAL TYPEDEFS
 */
__attribute__((aligned(4))) uint32_t MEM_BUF[BLE_MEMHEAP_SIZE / 4];

#if(defined(BLE_MAC)) && (BLE_MAC == TRUE)
const uint8_t MacAddr[6] = {0x84, 0xC2, 0xE4, 0x03, 0x02, 0x02};
#endif

/*********************************************************************
 * @fn      Main_Circulation
 *
 * @brief   主循环
 *
 * @return  none
 */
__HIGH_CODE
__attribute__((noinline))
void Main_Circulation()
{
    PRINT("Main_Circulation\n");
    while(1)
    {
        TMOS_SystemProcess();
    }
}

/*********************************************************************
 * @fn      main
 *
 * @brief   主函数
 *
 * @return  none
 */
int main(void)
{
#if(defined(DCDC_ENABLE)) && (DCDC_ENABLE == TRUE)
    PWR_DCDCCfg(ENABLE);
#endif
    HSECFG_Capacitance(HSECap_18p);
    SetSysClock(CLK_SOURCE_HSE_PLL_62_4MHz);
#if(defined(HAL_SLEEP)) && (HAL_SLEEP == TRUE)
    GPIOA_ModeCfg(GPIO_Pin_All, GPIO_ModeIN_PU);
    GPIOB_ModeCfg(GPIO_Pin_All, GPIO_ModeIN_PU);
#endif
#ifdef DEBUG
    // GPIOA_SetBits(GPIO_Pin_14);
    // GPIOPinRemap(ENABLE, RB_PIN_UART0);
    // GPIOA_ModeCfg(GPIO_Pin_14, GPIO_ModeOut_PP_5mA);
    // UART0_DefInit();
    // GPIOA_SetBits(GPIO_Pin_9);
    // // GPIOPinRemap(ENABLE, RB_PIN_UART1);
    // GPIOA_ModeCfg(GPIO_Pin_9, GPIO_ModeOut_PP_5mA);
    // // UART0_DefInit();
    // UART1_DefInit();

    /* 配置串口1：先配置IO口模式，再配置串口 */
    GPIOA_SetBits(GPIO_Pin_9);
    GPIOA_ModeCfg(GPIO_Pin_8, GPIO_ModeIN_PU);      // RXD-配置上拉输入
    GPIOA_ModeCfg(GPIO_Pin_9, GPIO_ModeOut_PP_5mA); // TXD-配置推挽输出，注意先让IO口输出高电平
    UART1_DefInit();

#endif
    PRINT("Start @ChipID=%02X\n", R8_CHIP_ID);
    PRINT("%s\n", VER_LIB);

    CH58x_BLEInit();
    PRINT("BLE init ok\n");
    HAL_Init();
    PRINT("HAL init ok\n");
    GAPRole_PeripheralInit();
    PRINT("GAP init ok\n");
    Peripheral_Init();
    PRINT("Peripheral init ok\n");

    BSPWF5803_Init();
    PRINT("BSP init ok\n");

    Main_Circulation();
    PRINT("Main_Circulation\n");
}

/******************************** endfile @ main ******************************/