115 lines
3.5 KiB
C
115 lines
3.5 KiB
C
#ifndef __BSP_WF5803_H
|
|
#define __BSP_WF5803_H
|
|
|
|
#include "CH58x_common.h"
|
|
|
|
#define WF5803_EVT_START (0x0001 << 0)
|
|
#define WF5803_EVT_READ (0x0001 << 1)
|
|
|
|
|
|
void PRESS_LowPower(void);
|
|
|
|
void BSP_PRESS_Init(void);
|
|
|
|
|
|
#include "bmp3.h"
|
|
|
|
/*!
|
|
* @brief Function to select the interface between SPI and I2C.
|
|
*
|
|
* @param[in] bmp3 : Structure instance of bmp3_dev
|
|
* @param[in] intf : Interface selection parameter
|
|
*
|
|
* @return Status of execution
|
|
* @retval 0 -> Success
|
|
* @retval < 0 -> Failure Info
|
|
*/
|
|
BMP3_INTF_RET_TYPE BMP390_OUT_InterfaceInit(struct bmp3_dev *bmp3, uint8_t intf);
|
|
|
|
/*!
|
|
* @brief Function for reading the sensor's registers through I2C bus.
|
|
*
|
|
* @param[in] reg_addr : Register address.
|
|
* @param[out] reg_data : Pointer to the data buffer to store the read data.
|
|
* @param[in] len : No of bytes to read.
|
|
* @param[in] intf_ptr : Interface pointer
|
|
*
|
|
* @return Status of execution
|
|
* @retval = BMP3_INTF_RET_SUCCESS -> Success
|
|
* @retval != BMP3_INTF_RET_SUCCESS -> Failure Info
|
|
*
|
|
*/
|
|
BMP3_INTF_RET_TYPE bmp3_i2c_read(uint8_t reg_addr, uint8_t *reg_data, uint32_t len, void *intf_ptr);
|
|
|
|
/*!
|
|
* @brief Function for writing the sensor's registers through I2C bus.
|
|
*
|
|
* @param[in] reg_addr : Register address.
|
|
* @param[in] reg_data : Pointer to the data buffer whose value is to be written.
|
|
* @param[in] len : No of bytes to write.
|
|
* @param[in] intf_ptr : Interface pointer
|
|
*
|
|
* @return Status of execution
|
|
* @retval = BMP3_INTF_RET_SUCCESS -> Success
|
|
* @retval != BMP3_INTF_RET_SUCCESS -> Failure Info
|
|
*
|
|
*/
|
|
BMP3_INTF_RET_TYPE bmp3_i2c_write(uint8_t reg_addr, const uint8_t *reg_data, uint32_t len, void *intf_ptr);
|
|
|
|
/*!
|
|
* @brief Function for reading the sensor's registers through SPI bus.
|
|
*
|
|
* @param[in] reg_addr : Register address.
|
|
* @param[out] reg_data : Pointer to the data buffer to store the read data.
|
|
* @param[in] len : No of bytes to read.
|
|
* @param[in] intf_ptr : Interface pointer
|
|
*
|
|
* @return Status of execution
|
|
* @retval = BMP3_INTF_RET_SUCCESS -> Success
|
|
* @retval != BMP3_INTF_RET_SUCCESS -> Failure Info
|
|
*
|
|
*/
|
|
BMP3_INTF_RET_TYPE BMP390_OUT_SPI_Read(uint8_t reg_addr, uint8_t *reg_data, uint32_t len, void *intf_ptr);
|
|
|
|
/*!
|
|
* @brief Function for writing the sensor's registers through SPI bus.
|
|
*
|
|
* @param[in] reg_addr : Register address.
|
|
* @param[in] reg_data : Pointer to the data buffer whose data has to be written.
|
|
* @param[in] len : No of bytes to write.
|
|
* @param[in] intf_ptr : Interface pointer
|
|
*
|
|
* @return Status of execution
|
|
* @retval = BMP3_INTF_RET_SUCCESS -> Success
|
|
* @retval != BMP3_INTF_RET_SUCCESS -> Failure Info
|
|
*
|
|
*/
|
|
BMP3_INTF_RET_TYPE BMP390_OUT_SPI_Write(uint8_t reg_addr, const uint8_t *reg_data, uint32_t len, void *intf_ptr);
|
|
|
|
/*!
|
|
* @brief This function provides the delay for required time (Microsecond) as per the input provided in some of the
|
|
* APIs.
|
|
*
|
|
* @param[in] period : The required wait time in microsecond.
|
|
* @param[in] intf_ptr : Interface pointer
|
|
*
|
|
* @return void.
|
|
*
|
|
*/
|
|
void bmp3_delay_us(uint32_t period, void *intf_ptr);
|
|
|
|
/*!
|
|
* @brief Prints the execution status of the APIs.
|
|
*
|
|
* @param[in] api_name : Name of the API whose execution status has to be printed.
|
|
* @param[in] rslt : Error code returned by the API whose execution status has to be printed.
|
|
*
|
|
* @return void.
|
|
*/
|
|
void bmp3_check_rslt(const char api_name[], int8_t rslt);
|
|
|
|
|
|
void BMP390_IN_IRQ(void);
|
|
|
|
#endif
|