Wells_RTthread/app_wells_0415/source insight/wells.si4project/Backup/bsp_temperature(495).c

#include "bsp_temperature.h"


rt_device_t bsp_temper_dev = RT_NULL;
extern  iic_control_t iic_ctl_temper;

#if USE_IIC_EXTEND_TEMP

rt_err_t temper_init(rt_device_t dev)
{
	uint32_t serial_number = 0;

	user_iic_init();

	LOG_OUT("temper_init\r\n");

	uint8_t data_read[6] = {0};

	user_iic_read_byte_more_16bit(SHT3X_ADDR, SHT3X_SERIAL_NUM, data_read, 6);

	if( SHT3X_CRC_Check(data_read, 2, data_read[2]) == 1)
	{
		if( SHT3X_CRC_Check(data_read+3, 2, data_read[5]) == 1)
		{
			LOG_OUT("SHT3X_CRC_Check ok\r\n");
		}
	}
	for(uint8_t t=0; t<6; t++)
	{
		LOG_OUT("%x=%x\r\n", t, data_read[t]);
	}
	LOG_OUT("\r\n");

	serial_number = (data_read[0]<<24) |
					(data_read[1]<<16) |
					(data_read[3]<<8)  |
					(data_read[4]) ;

	LOG_OUT("serial_number=%d \r\n", serial_number);
	return RT_EOK;
}
#else

rt_err_t temper_init(rt_device_t dev)
{
    uint32_t serial_number = 0;
    //打开
    SHT3X_HIGH;
    SHT3X_SCL_HIGH;
    SHT3X_SDA_HIGH;
    rt_thread_mdelay(1000);

    user_iic_init_extend(&iic_ctl_temper);

    LOG_OUT("temper_init\r\n");

    uint8_t data_read[6] = {0};

    user_iic_read_byte_more_16bit_extend(&iic_ctl_temper, SHT3X_ADDR, SHT3X_SERIAL_NUM, data_read, 6);

    for(uint8_t t=0; t<6; t++)
    {
        LOG_OUT("%x=%x\r\n", t, data_read[t]);
    }
    LOG_OUT("\r\n");

    if( SHT3X_CRC_Check(data_read, 2, data_read[2]) == 1)
    {
        if( SHT3X_CRC_Check(data_read+3, 2, data_read[5]) == 1)
        {
            LOG_OUT("SHT3X_CRC_Check ok\r\n");
        }
    }

    serial_number = (data_read[0]<<24) |
                    (data_read[1]<<16) |
                    (data_read[3]<<8)  |
                    (data_read[4]) ;

    LOG_OUT("serial_number=%d \r\n", serial_number);

    //关闭
    SHT3X_LOW;
    SHT3X_SCL_LOW;
    SHT3X_SDA_LOW;

    return RT_EOK;
}



#endif



rt_err_t temper_open(rt_device_t dev, rt_uint16_t oflag)
{
	//LOG_OUT("temper_open\r\n");
	return RT_EOK;
}

rt_err_t temper_close(rt_device_t dev)
{
	//LOG_OUT("temper_close\r\n");
	return RT_EOK;
}

#if USE_IIC_EXTEND_TEMP

rt_size_t temper_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
{
	LOG_OUT("temper_read\r\n");

	uint8_t data_r[6] = {0};
	float Temperature = 0;
	float Humidity = 0;

	user_iic_read_byte_more_16bit(SHT3X_ADDR, SHT3X_READ_DATA, data_r, 6);

	for(uint8_t t=0; t<6; t++)
	{
		LOG_OUT("%x ",data_r[t]);
	}
	LOG_OUT("\r\n");

	if( SHT3X_CRC_Check(data_r, 2, data_r[2]) == 1)
	{
		if( SHT3X_CRC_Check(data_r+3, 2, data_r[5]) == 1)
		{
			LOG_OUT("SHT3X_CRC_Check ok\r\n");

			Temperature = data_r[0] << 8 | data_r[1];
			Humidity = data_r[3] << 8 | data_r[4];
			Temperature = (Temperature * 175.0 / 65535) - 45.0;
			Humidity = Humidity * 100.0 / 65535;
			LOG_OUT("Temperature=%f \r\n", Temperature);
			LOG_OUT("Humidity=%f \r\n", Humidity);
		}
	}



	return RT_EOK;
}
#else


rt_size_t temper_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
{
    LOG_OUT("temper_read\r\n");

    uint8_t data_r[6] = {0};
    float Temperature = 0;
    float Humidity = 0;

    int temp =0;
    uint8_t temp_buff[4] = {0};

    //打开
    SHT3X_HIGH;
    SHT3X_SCL_HIGH;
    SHT3X_SDA_HIGH;
    rt_thread_mdelay(1000);

    user_iic_read_byte_more_16bit_extend(&iic_ctl_temper, SHT3X_ADDR, SHT3X_READ_DATA, data_r, 6);
    for(uint8_t t=0; t<6; t++)
    {
        LOG_OUT("%x ",data_r[t]);
    }
    LOG_OUT("\r\n");

    //关闭
    SHT3X_LOW;
    SHT3X_SCL_LOW;
    SHT3X_SDA_LOW;

    if( SHT3X_CRC_Check(data_r, 2, data_r[2]) == 1)
    {
        if( SHT3X_CRC_Check(data_r+3, 2, data_r[5]) == 1)
        {
            LOG_OUT("CRC_Check ok\r\n");

            Temperature = data_r[0] << 8 | data_r[1];
            Humidity = data_r[3] << 8 | data_r[4];
            Temperature = (Temperature * 175.0 / 65535) - 45.0;
            Humidity = Humidity * 100.0 / 65535;
            LOG_OUT("Temperature=%f \r\n", Temperature);
            LOG_OUT("Humidity=%f \r\n", Humidity);

            temp = (short int)((Temperature+0.05)*10);

            if(temp >= 0)
            {

            }
            else
            {
                temp = (-(temp))|0x8000;
            }

            temp_buff[0] = (temp>>8)&0xFF;
            temp_buff[1] = (temp)&0xFF;
            LOG_OUT("temp=%d \r\n", temp);


            temp = (int)((Humidity+0.05)*10);
            temp_buff[2] = (temp>>8)&0xFF;
            temp_buff[3] = (temp)&0xFF;
            LOG_OUT("hum=%d \r\n", temp);

            memcpy(buffer, temp_buff, 4);

            return 4;
        }
    }


    return RT_EOK;
}



#endif


rt_size_t temper_write(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
{
	//LOG_OUT("temper_write\r\n");
}

rt_err_t temper_control(rt_device_t dev, int cmd, void *args)
{
	//LOG_OUT("temper_control\r\n");
	return RT_EOK;
}


int bsp_temper_init(void)
{
	bsp_temper_dev = rt_device_create(RT_Device_Class_Char, 1);
	if(bsp_temper_dev == RT_NULL)
	{
		LOG_OUT("bsp_temper_dev ERR!!!\r\n");
	}

	bsp_temper_dev->init = temper_init;
	bsp_temper_dev->open = temper_open;
	bsp_temper_dev->close = temper_close;
	bsp_temper_dev->read = temper_read;
	bsp_temper_dev->write = NULL;
	bsp_temper_dev->control = NULL;

	rt_device_register(bsp_temper_dev, "temper", RT_DEVICE_FLAG_RDWR);

	LOG_OUT("bsp_temper_init ok\r\n");
	return RT_EOK;
}


uint8_t SHT3X_CRC_Check(uint8_t *check_data, uint8_t num, uint8_t check_crc)
{
    uint8_t bit = 0;        // bit mask
    uint8_t crc = 0xFF; // calculated checksum
    uint8_t byteCtr = 0;    // byte counter

 // calculates 8-Bit checksum with given polynomial x8+x5+x4+1
    for(byteCtr = 0; byteCtr < num; byteCtr++)
    {
        crc ^= (*(check_data+byteCtr));
        //crc校验，最高位是1就^0x31
        for(bit = 8; bit > 0; --bit)
        {
            if(crc & 0x80)
                crc = (crc << 1) ^ 0x31;
            else
                crc = (crc << 1);
        }
    }

    LOG_OUT("crc=%x \r\n", crc);

    if(crc==check_crc)
        return 1;
    else
        return 0;
}